CC2430
- RF/Layout
- 2.4 GHz IEEE 802.15.4 compliant RF transceiver (industry leading CC2420 radio core)
- Excellent receiver sensitivity and robustness to interferers
- Very few external components
- Only a single crystal needed for mesh network systems
- RoHS compliant 7x7mm QLP48 package
- Low Power
- Low current consumption (RX: 27 mA, TX: 27 mA, microcontroller running at 32 MHz)
- Only 0.5 µA current consumption in powerdown mode, where external interrupts or the RTC can wake up the system
- 0.3 µA current consumption in stand-by mode, where external interrupts can wake up the system
- Very fast transition times from low-power modes to active mode enables ultra low average power consumption in low dutycycle systems
- Wide supply voltage range (2.0V - 3.6V)
- Microcontroller
- High performance and low power 8051 microcontroller core
- 32, 64 or 128 KB in-system programmable flash
- 8 KB RAM, 4 KB with data retention in all power modes
- Powerful DMA functionality
- Watchdog timer
- One IEEE 802.15.4 MAC timer, one general 16-bit timer and two 8-bit timers
- Hardware debug support
- Peripherals
- CSMA/CA hardware support.
- Digital RSSI / LQI support
- Battery monitor and temperature sensor
- 12-bit ADC with up to eight inputs and configurable resolution
- AES security coprocessor
- Two powerful USARTs with support for several serial protocols
- 21 general I/O pins, two with 20mA sink/source capability
- Development tools
- Powerful and flexible development tools available
- APPLICATIONS
- 2.4 GHz IEEE 802.15.4 systems
- ZigBee™ systems
- Home/building automation
- Industrial Control and Monitoring
- Low power wireless sensor networks
- PC peripherals
- Set-top boxes and remote controls
- Consumer Electronics
The CC2430 comes in three different flash versions: CC2430F32/64/128, with 32/64/128 KB of flash memory respectively. The CC2430 is a true System-on-Chip (SoC) solution specifically tailored for IEEE 802.15.4 and ZigBee® applications. It enables ZigBee® nodes to be built with very low total bill-ofmaterial costs. The CC2430 combines the excellent performance of the leading CC2420 RF transceiver with an industry-standard enhanced 8051 MCU, 32/64/128 KB flash memory, 8 KB RAM and many other powerful features. Combined with the industry leading ZigBee® protocol stack (Z-Stack™) from Texas Instruments, the CC2430 provides the markets most competitive ZigBee® solution.
The CC2430 is highly suited for systems where ultra low power consumption is required. This is ensured by various operating modes. Short transition times between operating modes further ensure low power consumption.
技术文档
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
CC2520EMK — CC2520 评估模块套件
CC2520EMK 是用于 CC2520DK 的附带开发套件。完全独立的开发套件是 CC2520DK。CC2520EMK 开发套件由两个 CC2520EM 插入式模块和两根天线组成。CC2520EMK 只有与母板/主机板结合方可使用,这些母板/主机板通常是 CC2520DK 中包含的 SmartRF05EB 和 CCMSP-EM430F2618。此电路板还与 MSP430F5438 试验板兼容。
CC-DEBUGGER — 用于射频片上系统的调试器和编程器
CC 调试器是用于 TI 低功耗射频片上系统的小型编程器和调试器。它可以与用于 8051(7.51A 或更高版本)的 IAR 嵌入式工作平台一起使用以进行调试,并可与 SmartRF 闪存编程器一起使用以进行闪存编程。CC 调试器还可用于控制 SmartRF Studio 中的所选器件。
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
支持的产品和硬件
产品
低功耗 2.4GHz 产品
Sub-1GHz 无线 MCU
Sub-1GHz 收发器
其他无线产品
汽车类无线连接产品
硬件开发
评估板
开发套件
软件
软件编程工具
计算工具
驱动程序或库
SWRC046 — SmartRF(TM) Studio 6.13.1
支持的产品和硬件
产品
低功耗 2.4GHz 产品
Sub-1GHz 无线 MCU
Sub-1GHz 收发器
其他无线产品
软件
计算工具
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
支持的产品和硬件
产品
MSP430 微控制器
低功耗 2.4GHz 产品
Sub-1GHz 无线 MCU
Sub-1GHz 收发器
其他无线产品
汽车类无线连接产品
硬件开发
开发套件
评估板
CC2430BALUN_REFDES — CC2430 Anaren 不平衡变压器参考设计
封装 | 引脚 | 下载 |
---|---|---|
VQFNP (RTC) | 48 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点