主页 电源管理 电池管理 IC 电池电量监测

单节锂电池和锂聚合物电池电量监测计 IC

产品详情

Cell chemistry Li-Ion/Li-Polymer Number of series cells Single Cell Communication interface HDQ Battery capacity (min) (mAh) 300 Battery capacity (max) (mAh) 6000 Implementation Pack External capacity indication None Operating temperature range (°C) -20 to 70 Rating Catalog
Cell chemistry Li-Ion/Li-Polymer Number of series cells Single Cell Communication interface HDQ Battery capacity (min) (mAh) 300 Battery capacity (max) (mAh) 6000 Implementation Pack External capacity indication None Operating temperature range (°C) -20 to 70 Rating Catalog
VSON (DRK) 10 12 mm² 4 x 3
  • HDQ (bq27000) or I2C (bq27200) Communication
  • Reports Accurate Time-to-Empty With Measured Load and Historical Maximum and Standby Loads
  • Reports Temperature, Voltage, and Current
  • High Accuracy Charge and Discharge Current Integration with Automatic Offset Calibration
  • Requires No User Calibration
  • Programmable Input/Output Port
  • Internal User EEPROM Configuration Memory
  • Automatic Capacity Reduction With Age
  • Stable Oscillator Without External Components
  • Dynamic End-of-Discharge Detection Delay to Allow Use in a High-Dynamic Load Environment
  • Automatic Sleep Mode When Communication Lines are Low
  • Available in a Small 3 mm x 4 mm QFN Package
  • Five Low-Power Operating Modes
    • Active: < 90 µA
    • Sleep: < 2.5 µA
    • Ship: < 2 µA (bq27000 only)
    • Hibernate: < 1.5 µA
    • Data Retention: < 20 nA
  • APPLICATIONS
    • PDA
    • Smart Phones
    • MP3 Players
    • Digital Cameras
    • Internet Appliances
    • Handheld Devices

bqJUNIOR is a trademark of Texas Instruments.

  • HDQ (bq27000) or I2C (bq27200) Communication
  • Reports Accurate Time-to-Empty With Measured Load and Historical Maximum and Standby Loads
  • Reports Temperature, Voltage, and Current
  • High Accuracy Charge and Discharge Current Integration with Automatic Offset Calibration
  • Requires No User Calibration
  • Programmable Input/Output Port
  • Internal User EEPROM Configuration Memory
  • Automatic Capacity Reduction With Age
  • Stable Oscillator Without External Components
  • Dynamic End-of-Discharge Detection Delay to Allow Use in a High-Dynamic Load Environment
  • Automatic Sleep Mode When Communication Lines are Low
  • Available in a Small 3 mm x 4 mm QFN Package
  • Five Low-Power Operating Modes
    • Active: < 90 µA
    • Sleep: < 2.5 µA
    • Ship: < 2 µA (bq27000 only)
    • Hibernate: < 1.5 µA
    • Data Retention: < 20 nA
  • APPLICATIONS
    • PDA
    • Smart Phones
    • MP3 Players
    • Digital Cameras
    • Internet Appliances
    • Handheld Devices

bqJUNIOR is a trademark of Texas Instruments.

The bqJUNIOR™ series are highly accurate stand-alone single-cell Li-Ion and Li-Pol battery capacity monitoring and reporting devices targeted at space-limited, portable applications. The IC monitors a voltage drop across a small current sense resistor connected in series with the battery to determine charge and discharge activity of the battery. Compensations for battery temperature, self-discharge, and discharge rate are applied to the capacity measurments to provide available time-to-empty information across a wide range of operating conditions. Battery capacity is automatically recalibrated, or learned, in the course of a discharge cycle from full to empty. Internal registers include current, capacity, time-to-empty, state-of-charge, cell temperature and voltage, status, and more.

The bqJUNIOR can operate directly from single-cell Li-Ion and Li-Pol batteries and communicates to the system over a HDQ one-wire or I2C serial interface.

The bqJUNIOR™ series are highly accurate stand-alone single-cell Li-Ion and Li-Pol battery capacity monitoring and reporting devices targeted at space-limited, portable applications. The IC monitors a voltage drop across a small current sense resistor connected in series with the battery to determine charge and discharge activity of the battery. Compensations for battery temperature, self-discharge, and discharge rate are applied to the capacity measurments to provide available time-to-empty information across a wide range of operating conditions. Battery capacity is automatically recalibrated, or learned, in the course of a discharge cycle from full to empty. Internal registers include current, capacity, time-to-empty, state-of-charge, cell temperature and voltage, status, and more.

The bqJUNIOR can operate directly from single-cell Li-Ion and Li-Pol batteries and communicates to the system over a HDQ one-wire or I2C serial interface.

下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 17
类型 标题 下载最新的英语版本 日期
* 数据表 Single-Cell Li-Ion and Li-Pol Battery Gas Gauge IC For Portable Applications 数据表 (Rev. D) 2006年 2月 27日
应用手册 Battery Authentication and Security Schemes (Rev. A) 2014年 7月 17日
EVM 用户指南 bq27000EVM Single Cell Battery Fuel Gauge Evaluation Module (Rev. B) 2013年 10月 4日
应用手册 Feature Set Comparison of bq27x00, bq27x10, bq27500, and bq27510 (Rev. A) 2008年 12月 2日
应用手册 HDQ Communication Basics (Rev. A) 2008年 9月 18日
模拟设计期刊 适用于单节或两节电池供电的便携式应用的完整电池组设计 英语版 2008年 6月 27日
应用手册 ESD and RF Mitigation in Handheld Battery Pack Electronics 2008年 3月 6日
应用手册 Single Cell Gas Gauge Circuit Design 2008年 2月 22日
应用手册 Single Cell Impedance Track Printed-Circuit Board Layout 2008年 2月 22日
更多文献资料 BQ27000_NanoEVM_ Schematic 2007年 2月 13日
更多文献资料 TPS712xx_NanoEVM_OV 2007年 1月 29日
应用手册 Multicell Li-Ion and Li-Pol Battery Gas-Gauge Application Using the bqJunior 2006年 5月 26日
应用手册 Using the bq27x00 With a Primary Cell Battery 2005年 12月 15日
用户指南 bq27x00 Single-Cell Battery Fuel Gauge Module Tester and Programmer 2005年 12月 2日
应用手册 Choosing Between Battery Gas Gauges & Monitors to Track Charge Availabilility 2005年 9月 27日
应用手册 Configuring the bq27000/200 for Gas Gauge Applications 2005年 8月 29日
应用手册 Building a Superior Battery Monitor with the bq27x00 2005年 6月 20日

设计和开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

支持软件

SLUC261 Gas Gauge Chemistry Updater Setup v7.82

lock = 需要出口许可(1 分钟)
支持的产品和硬件

支持的产品和硬件

产品
电池电量监测
BQ20Z40 具有 Impedance Track 技术的符合 SBS 的电量监测计,适用于与 BQ29330 共同使用 BQ20Z40-R1 采用 Impedance Track™ 技术且符合 SBS 1.1 标准的电量监测计 BQ20Z70-V150 采用 Impedance Track™ 技术且符合 SBS 1.1 标准的电量监测计 BQ20Z70-V160 采用 Impedance Track™ 技术且符合 SBS 1.1 标准的电量监测计,可与 bq29330 一起使用 BQ20Z80 采用 Impedance Track™ 技术且符合 SBS 1.1 标准的电量监测计,可与 bq29312 一起使用 BQ20Z80-V102 采用 Impedance Track™ 技术且符合 SBS 1.1 标准的电量监测计 BQ20Z80-V110 采用 Impedance Track™ 技术且符合 SBS 1.1 标准的电量监测计,固件版本为 v1.10 BQ20Z80A-V110 采用 Impedance Track™ 技术且符合 SBS 1.1 标准的电量监测计,可与 bq29312A 一起使用 BQ27000 单节锂电池和锂聚合物电池电量监测计 IC BQ27010 适用于便携应用、带 HDQ 接口的锂离子和锂聚合物电池电量监测计 IC BQ27200 具有 12C 接口的单节锂离子和锂聚合物电池电量监测计 IC BQ27210 适用于便携应用、带 I2C 接口的锂离子和锂聚合物电池电量监测计 IC BQ27425-G1 具有直接电池连接功能的系统侧 Impedance Track™ 电量监测计 | 电池电量监测计 BQ27505-J5 系统侧 Impedance Track™ 电量监测计,固件版本为 v2.29
软件
设计工具
GASGAUGECHEM-SW 电量监测计化学物质更新器
仿真模型

BQ27000 IBIS Model

SLUM102.ZIP (22 KB) - IBIS Model
封装 引脚 下载
VSON (DRK) 10 查看选项

订购和质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息:
  • 制造厂地点
  • 封装厂地点

支持和培训

视频