TS3DV520E
- Compatible With HDMI v1.2a (Type A) DVI 1.0
High-Speed Digital Interface- Wide Bandwidth to support throughput of
over 1.65 Gbps (Data rate 1.9 Gbps Typ) - Serial Data Stream at 10× Pixel Clock Rate
- Supports All Video Formats up to 1080p
and SXGA (1280 × 1024 at 75 Hz) - Total Raw Capacity 4.95 Gbps (Single Link)
- HDCP Compatible
- Wide Bandwidth to support throughput of
- Compatible with SXGA Video Display formats
up to 1080P (1280 × 1024 at 75Hz) - Low Crosstalk (XTALK = –37 dB Typ)
- Low Bit-to-Bit Skew (tsk(o) = 0.1 ns Max)
- Low and Flat ON-State Resistance
(ron = 4 Typ, ron(flat) = 0.5 Typ) - Low Input/Output Capacitance
(CON = 8 pF Typ) - Rail-to-Rail Switching on Data I/O Ports
(0 to 3.6 V) - VCC Operating Range From 3 V to 3.6 V
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Performance Tested
- 14-kV Human-Body Model Per JESD 22
(A114-B, Class II) - 7.5-kV Contact Discharge Per IEC 61000-4-2
- 14-kV Human-Body Model Per JESD 22
- Applications
- DVI/HDMI Signal Switching
- Differential DVI, HDMI Signal Multiplexing for
Audio/Video Receivers and High-Definition
Televisions (HDTVs)
The TS3DV520E is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input. SEL controls the data path of the multiplexer/demultiplexer. The device provides five differential channels for digital video signal switching.
This device provides low and flat ON-state resistance (ron) and excellent ON-state resistance match. Low input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device suitable for various digital video applications, such as DVI and HDMI.
Voltage on the SEL pin should be less or equal to VCC, even in the power-down mode
(VCC = 0 V).
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | TS3DV520E 5-Channel Differential 10:20 Multiplexer Switch 数据表 (Rev. B) | 2009年 5月 12日 | |||
* | 勘误表 | Datasheet Errata for TS3DV520E Device Type | 2008年 10月 14日 | |||
应用手册 | Differential Passive Signal Switch on Computing (Rev. A) | 2009年 7月 28日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
TINA-TI — 基于 SPICE 的模拟仿真程序
TINA-TI 安装需要大约 500MB。直接安装,如果想卸载也很容易。我们相信您肯定会爱不释手。
TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能,但不支持完整版 TINA 所提供的某些其他功能。
如需获取可用 TINA-TI 模型的完整列表,请参阅:SpiceRack - 完整列表
需要 HSpice (...)
封装 | 引脚 | 下载 |
---|---|---|
WQFN (RUA) | 42 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点