TPA2051D3
- Mono Class-D Amp: 730 mW into 8 from 3.6 V Supply (1% THD)
- Class-D Bypass Switches
- DirectPath Stereo Headphone Amplifier
- No Output Capacitors Required
- SpeakerGuard Automatic Gain Control (AGC)
- One Differential Mono and Two Stereo Single-Ended Inputs
- 3:1 Input MUX with Mode Control
- 32-Step Volume Control for Both Input Channels
- Independent Volume Controls for All Inputs
- Independent Shutdown for Headphone and Class-D Amplifiers
- I2C Interface
- Short-Circuit and Thermal-Overload Protection
- Operates from 2.5 V to 5.5 V
- 25-Ball 2,16 mm × 2,11 mm, 0,4 mm pitch WCSP
- APPLICATIONS
- Smart Phones / Cellular Phones
- Portable Media Players
- Portable Gaming
- Multimedia Platforms
The TPA2051D3 is an audio subsystem with a mono Class-D power amplifier, a stereo DirectPath headphone amplifier, and bypass switches. The DirectPath headphone amplifier eliminates the need for external dc-blocking output capacitors. The built-in charge pump creates a negative supply voltage for the headphone amplifier, allowing a 0 V dc bias at the output. The DirectPath headphone amplifier drives 25 mW into 16 speakers from a 4.2 V supply.
The subsystem includes three inputs: A differential mono input and two stereo single-ended (SE) inputs. The stereo inputs are also configurable as differential mono inputs. Each input channel has an independent volume control. Seven operating modes provide input-to-output combinations and shutdown control. Operating mode and volume levels are controlled over a 1.8 V compatible I2C interface.
The TPA2051D3 uses SpeakerGuardTM technology to prevent output clipping distortion and excessive power to the speaker and headphones.
The Class-D amplifier includes a bypass mode. This allows the baseband IC (BB) to directly drive the 8 speaker. This is useful for dual-mode speaker phones in voiceonly mode.
The Class-D amplifier uses 4.9 mA and the DirectPath amplifier uses 4.1 mA of typical quiescent current. Total supply current reduces to less than 1 µA in shutdown.
The TPA2051D3 is available in a 25-bump 2,16 mm × 2,11 mm, 0,4 mm pitch WCSP with less than 0.8 mm height.
您可能感兴趣的相似产品
功能与比较器件相似
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | 2.9 W/Channel Mono Class-D Audio Subsystem with DirectPath™ Headphone Amplifier 数据表 (Rev. A) | 2009年 10月 21日 | |||
应用手册 | TPA2051D3 I²C Pull-Up Resistor Selection | 2011年 10月 16日 | ||||
EVM 用户指南 | TPA2051D3EVM - User Guide | 2009年 1月 13日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
封装 | 引脚 | 下载 |
---|---|---|
DSBGA (YFF) | 25 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点