主页 音频 音频放大器 扬声器放大器
主页
音频
音频放大器
扬声器放大器

TAS5615

正在供货

具有集成反馈的模拟输入 160W 立体声（总计 300W）D 类放大器

立即订购
数据表

TAS5615

正在供货
数据表 立即订购

产品详情

Rating Catalog Load (min) (Ω) 8 Iq (typ) (mA) 11.5 PSRR (dB) 80 Operating temperature range (°C) 0 to 70
Rating Catalog Load (min) (Ω) 8 Iq (typ) (mA) 11.5 PSRR (dB) 80 Operating temperature range (°C) 0 to 70
HSSOP (DKD) 44 225.78 mm² 15.9 x 14.2 HTQFP (PHD) 64 256 mm² 16 x 16
  • Active Enabled Integrated Feedback Provides: (PurePath™ HD Technology)
    • Signal Bandwidth up to 80 kHz for High-Frequency Content From
      High-Definition Sources
    • Ultralow 0.03% THD at 1 W into 8
    • 0.03% THD Across All Frequencies for Natural Sound at 1 W
    • 80-dB PSRR (BTL, No Input Signal)
    • >100-dB (A weighted) SNR
    • Click- and Pop-Free Start-Up
    • Minimal External Components Compared to Discrete Solutions
  • Multiple Configurations Possible on the Same PCB:
    • Mono Parallel Bridge-Tied Load (PBTL)
    • 2.1 Single-Ended (SE) Stereo Pair and Bridge-Tied Load (BTL) Subwoofer
    • Quad Single-Ended (SE) Outputs
  • Total Output Power at 10% THD+N
    • 300 W in Mono PBTL Configuration
    • 160 W per Channel in Stereo BTL
    • 80 W per Channel in Quad Single-Ended
  • High Efficiency Power Stage (> 90%) With 120 m Output MOSFETs
  • Two Thermally Enhanced Package Options:
    • PHD (64-Pin QFP)
    • DKD (44-Pin PSOP3)
  • Self-Protection Design (Including Undervoltage, Overtemperature, Clipping, and
    Short-Circuit Protection) With Error Reporting
  • EMI Compliant When Used With Recommended System Design
  • APPLICATIONS
    • Mini Combo System
    • AV Receivers
    • DVD Receivers
    • Active Speakers

(1) Achievable output power levels are dependent on the thermal configuration of the target application. A high performance thermal interface material between the package exposed heatslug and the heat sink should be used to achieve high output power levels
PurePath HD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
  • Active Enabled Integrated Feedback Provides: (PurePath™ HD Technology)
    • Signal Bandwidth up to 80 kHz for High-Frequency Content From
      High-Definition Sources
    • Ultralow 0.03% THD at 1 W into 8
    • 0.03% THD Across All Frequencies for Natural Sound at 1 W
    • 80-dB PSRR (BTL, No Input Signal)
    • >100-dB (A weighted) SNR
    • Click- and Pop-Free Start-Up
    • Minimal External Components Compared to Discrete Solutions
  • Multiple Configurations Possible on the Same PCB:
    • Mono Parallel Bridge-Tied Load (PBTL)
    • 2.1 Single-Ended (SE) Stereo Pair and Bridge-Tied Load (BTL) Subwoofer
    • Quad Single-Ended (SE) Outputs
  • Total Output Power at 10% THD+N
    • 300 W in Mono PBTL Configuration
    • 160 W per Channel in Stereo BTL
    • 80 W per Channel in Quad Single-Ended
  • High Efficiency Power Stage (> 90%) With 120 m Output MOSFETs
  • Two Thermally Enhanced Package Options:
    • PHD (64-Pin QFP)
    • DKD (44-Pin PSOP3)
  • Self-Protection Design (Including Undervoltage, Overtemperature, Clipping, and
    Short-Circuit Protection) With Error Reporting
  • EMI Compliant When Used With Recommended System Design
  • APPLICATIONS
    • Mini Combo System
    • AV Receivers
    • DVD Receivers
    • Active Speakers

(1) Achievable output power levels are dependent on the thermal configuration of the target application. A high performance thermal interface material between the package exposed heatslug and the heat sink should be used to achieve high output power levels
PurePath HD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.

The TAS5615 is a high-performance analog input class-D amplifier with integrated closed-loop feedback technology (known as PurePath™ HD technology). It has the ability to drive up to 160 W(1) stereo into 8- speakers from a single 50-V supply.

PurePath HD technology enables traditional AB-amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class-D amplifiers.

Ultralow 0.03% THD+N is flat across all frequencies, ensuring that the amplifier does not add uneven distortion characteristics, and helps maintain a natural sound.

The efficiency of this class-D amplifier is greater than 90%. Undervoltage protection, overtemperature, clipping, short-circuit and overcurrent protection are all integrated, safeguarding the device and speakers against fault conditions that could damage the system.

The TAS5615 is a high-performance analog input class-D amplifier with integrated closed-loop feedback technology (known as PurePath™ HD technology). It has the ability to drive up to 160 W(1) stereo into 8- speakers from a single 50-V supply.

PurePath HD technology enables traditional AB-amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class-D amplifiers.

Ultralow 0.03% THD+N is flat across all frequencies, ensuring that the amplifier does not add uneven distortion characteristics, and helps maintain a natural sound.

The efficiency of this class-D amplifier is greater than 90%. Undervoltage protection, overtemperature, clipping, short-circuit and overcurrent protection are all integrated, safeguarding the device and speakers against fault conditions that could damage the system.
open-in-new 查找其他 扬声器放大器
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 2
类型 标题 下载最新的英语版本 日期
* 数据表 160W Stereo / 300W Mono PurePath(TM) HD Analog Input Power Stage 数据表 (Rev. B) 2010年 2月 18日
EVM 用户指南 TAS5615DKD2EVM User's Guide (Rev. A) 2010年 5月 5日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
封装 引脚 下载
HSSOP (DKD) 44 查看选项
HTQFP (PHD) 64 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

视频