主页 接口 RS-232 收发器
主页
接口
RS-232 收发器

SN75LBC187

正在供货

具有充电泵的多通道 EIA-232 驱动器/接收器

立即订购
数据表

SN75LBC187

正在供货
数据表 立即订购

产品详情

Drivers per package 3 Receivers per package 5 Logic voltage (min) (V) 5 Data rate (max) (Mbps) 0.12 Main supply voltage (nom) (V) 5 ESD HBM (kV) 0 Rating Catalog Operating temperature range (°C) 0 to 70 Vout (typ) (V) 7
Drivers per package 3 Receivers per package 5 Logic voltage (min) (V) 5 Data rate (max) (Mbps) 0.12 Main supply voltage (nom) (V) 5 ESD HBM (kV) 0 Rating Catalog Operating temperature range (°C) 0 to 70 Vout (typ) (V) 7
SSOP (DB) 28 79.56 mm² 10.2 x 7.8
  • Single IC and Single 5-V Supply Interface for Serial Communication Ports
  • Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-232-E-1991, EIA/TIA-562, and ITU Recommendation V.28
  • Switched-Capacitor Voltage Converter Eliminates Need for ±12-V Supplies
  • Voltage Converter Operates With Low Capacitance . . . 0.1 uF Min
  • Designed for Data Rates up to 120 kb/s Over 3-m Cable
  • Available in Shrink Small-Outline 25-mil- Pitch Package
  • Shutdown Mode to Save Power When Not in Use
  • ±30-V Receiver Input Voltage Range
  • LinBiCMOSTM Process Technology
  • Applications
    • Laptop or Notebook Computers
    • Portable Terminals
    • Single-Board Computers
    • Portable Test Equipment

    LinBiCMOS and LinASIC are trademarks of Texas Instruments Incorporated.
  • Single IC and Single 5-V Supply Interface for Serial Communication Ports
  • Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-232-E-1991, EIA/TIA-562, and ITU Recommendation V.28
  • Switched-Capacitor Voltage Converter Eliminates Need for ±12-V Supplies
  • Voltage Converter Operates With Low Capacitance . . . 0.1 uF Min
  • Designed for Data Rates up to 120 kb/s Over 3-m Cable
  • Available in Shrink Small-Outline 25-mil- Pitch Package
  • Shutdown Mode to Save Power When Not in Use
  • ±30-V Receiver Input Voltage Range
  • LinBiCMOSTM Process Technology
  • Applications
    • Laptop or Notebook Computers
    • Portable Terminals
    • Single-Board Computers
    • Portable Test Equipment

    LinBiCMOS and LinASIC are trademarks of Texas Instruments Incorporated.

The SN75LBC187 is a low-power LinBiCMOSTM device containing three drivers, five receivers, and a switched-capacitor voltage converter. The SN75LBC187 provides a single chip and single 5-V supply interface between the asynchronous communications element and the serial port connector of the data terminal equipment (DTE). This device has been designed to conform to ANSI Standards EIA/TIA-232-E, EIA/TIA-562, and ITU recommendation V.28.

The switched-capacitor voltage converter of the SN75LBC187 uses four small external capacitors to generate the positive and negative voltages required by EIA/TIA-232-E (and V.28) line drivers from a single 5-V input. The drivers feature output slew-rate limiting to eliminate the need for external filter capacitors. The receivers can accept ±30 V without damage. The device also features a reduced power or shutdown mode that cuts the quiescent power to the IC when not transmitting data between the CPU and peripheral.

The SN75LBC187 has been designed using LinBiCMOSTM technology and cells contained in the Texas Instruments LinASICTM library. The SN75LBC187 is characterized for operation from 0°C to 70°C.

NOTE:
This device includes circuit designs and process technologies that have patents pending.

The SN75LBC187 is a low-power LinBiCMOSTM device containing three drivers, five receivers, and a switched-capacitor voltage converter. The SN75LBC187 provides a single chip and single 5-V supply interface between the asynchronous communications element and the serial port connector of the data terminal equipment (DTE). This device has been designed to conform to ANSI Standards EIA/TIA-232-E, EIA/TIA-562, and ITU recommendation V.28.

The switched-capacitor voltage converter of the SN75LBC187 uses four small external capacitors to generate the positive and negative voltages required by EIA/TIA-232-E (and V.28) line drivers from a single 5-V input. The drivers feature output slew-rate limiting to eliminate the need for external filter capacitors. The receivers can accept ±30 V without damage. The device also features a reduced power or shutdown mode that cuts the quiescent power to the IC when not transmitting data between the CPU and peripheral.

The SN75LBC187 has been designed using LinBiCMOSTM technology and cells contained in the Texas Instruments LinASICTM library. The SN75LBC187 is characterized for operation from 0°C to 70°C.

NOTE:
This device includes circuit designs and process technologies that have patents pending.

open-in-new 查找其他 RS-232 收发器
下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相同但引脚有所不同
TRS3243E 正在供货 具有 +/-15kV IEC-ESD 保护的 3V 至 5.5V 多通道 500kbps RS-232 线路驱动器/接收器 Faster data rate and auto-powerdown feature

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 1
类型 标题 下载最新的英语版本 日期
* 数据表 Multichannel EIA-232 Driver/Receiver With Charge Pump 数据表 (Rev. C) 1995年 5月 1日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
模拟工具

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表 

需要 HSpice (...)

用户指南: PDF
英语版 (Rev.A): PDF
查看选项
封装 引脚 下载
SSOP (DB) 28 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频