PCM3003
- Monolithic 20-Bit ADC and DAC
- 16/20-Bit Input/Output Data
- Software Control: PCM3002
- Hardware Control: PCM3003
- Stereo ADC:
- Single-Ended Voltage Input
- Antialiasing Filter
- 64× Oversampling
- High Performance
- THD+N: &3150;86 dB
- SNR: 90 dB
- Dynamic Range: 90 dB
- Stereo DAC:
- Single-Ended Voltage Output
- Analog Low-Pass Filter
- 64× Oversampling
- High Performance
- THD+N: –86 dB
- SNR: 94 dB
- Dynamic Range: 94 dB
- Special Features (PCM3002, PCM3003)
- Digital De-Emphasis: 32 kHz, 44.1 kHz, 48 kHz
- Power Down: ADC/DAC Independent
- Special Features (PCM3002)
- Digital Attenuation (256 Steps)
- Soft Mute
- Digital Loopback
- Four Alternative Audio Data Formats
- Sampling Rate: 4 kHz to 48 kHz
- Single 3-V Power Supply
- Small Package: SSOP-24
- APPLICATIONS
- DVC Applications
- DSC Applications
- Portable/Mobile Audio Applications
System Two, Audio Precision are trademarks of Audio Precision, Inc.
All other trademarks are the property of their respective owners.
The PCM3002 and PCM3003 are low-cost, single-chip stereo audio codecs (analog-to-digital and digital-to-analog converters) with single-ended analog voltage input and output.
The ADCs and DACs employ delta-sigma modulation with 64-times oversampling. The ADCs include a digital decimation filter, and the DACs include an 8-times oversampling digital interpolation filter. The DACs also include digital attenuation, de-emphasis, infinite zero detection, and soft mute to form a complete subsystem. The PCM3002 and PCM3003 operate with left-justified (ADC) and right-justified (DAC) formats, while the PCM3002 also supports other formats, including the I2S data format. The PCM3002 and PCM3003 provide a power-down mode that operates on the ADCs and DACs independently.
The PCM3002 and PCM3003 are fabricated using a highly advanced CMOS process, and are available in a 24-pin SSOP package. The PCM3002 and PCM3003 are suitable for a wide variety of cost-sensitive consumer applications where good performance is required.
The PCM3002 programmable functions are controlled by software. The PCM3003 functions, which are controlled by hardware, include de-emphasis, power-down, and audio data format selections.
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | 16-/20-Bit Single-Ended Analog Input/Output SoundPlus? Stereo Audio CODECs 数据表 (Rev. A) | 2004年 10月 28日 | |||
应用手册 | 所选封装材料的热学和电学性质 | 2008年 10月 16日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
封装 | 引脚 | 下载 |
---|---|---|
SSOP (DB) | 24 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。