The OPA2691 sets a new level of performance for broadband dual current-feedback op amps. Operating on a very low 5.1mA/ch supply current, the OPA2691 offers a slew rate and output power normally associated with a much higher supply current. A new output stage architecture delivers a high output current with minimal voltage headroom and crossover distortion. This gives exceptional single-supply operation. Using a single +5V supply, the OPA2691 can deliver a 1V to 4V output swing with over 150mA drive current and 190MHz bandwidth. This combination of features makes the OPA2691 an ideal RGB line driver or single-supply Analog-to-Digital Converter (ADC) input driver.
The OPA2691s low 5.1mA/ch supply current is precisely trimmed at 25°C. This trim, along with low drift over temperature, ensures lower maximum supply current than competing products. System power may be further reduced by using the optional disable control pin (SO-14 only). Leaving this disable pin open, or holding it HIGH, gives normal operation. If pulled LOW, the OPA2691 supply current drops to less than 150 µA/ch while the output goes into a high impedance state. This feature may be used for power savings.
All trademarks are the property of their respective owners.
|Part number||立即下单||Architecture||Number of channels (#)||Total supply voltage (Min) (+5V=5, +/-5V=10)||Total supply voltage (Max) (+5V=5, +/-5V=10)||BW @ Acl (MHz)||Acl, min spec gain (V/V)||Slew rate (Typ) (V/us)||Vn at flatband (Typ) (nV/rtHz)||Vn at 1 kHz (Typ) (nV/rtHz)||Iq per channel (Typ) (mA)||Vos (offset voltage @ 25 C) (Max) (mV)||Rail-to-rail||Features||Rating||Operating temperature range (C)||Package Group||Package size: mm2:W x L (PKG)||CMRR (Typ) (dB)||Input bias current (Max) (pA)||Offset drift (Typ) (uV/C)||GBW (Typ) (MHz)||Output current (Typ) (mA)||2nd harmonic (dBc)||3rd harmonic (dBc)||@ MHz|
|2||4||12||280||1||2100||1.7||1.7||5.1||3||No||Shutdown||Catalog||-40 to 85||
SOIC | 14
SOIC | 8
8SOIC: 19 mm2: 3.91 x 4.9 (SOIC | 8)
14SOIC: 52 mm2: 6 x 8.65 (SOIC | 14)