MSP430F2112 (正在供货)

16 位超低功耗微控制器,具有 2kB 闪存、256B RAM、10 位 ADC 和 USCI

16 位超低功耗微控制器,具有 2kB 闪存、256B RAM、10 位 ADC 和 USCI - MSP430F2112
数据表
勘误表
 

描述

The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.

The MSP430F21x2 series is an ultra-low-power microcontroller with two built-in 16-bit timers, a fast 10-bit A/D converter with integrated reference and a data transfer controller (DTC), a comparator, built-in communication capability using the universal serial communication interface, and up to 24 I/O pins.

特性

  • Low Supply Voltage Range: 1.8 V to 3.6 V
  • Ultra-Low Power Consumption
    • Active Mode: 250 µA at 1 MHz, 2.2 V
    • Standby Mode: 0.7 µA
    • Off Mode (RAM Retention): 0.1 µA
  • Ultra-Fast Wake-Up From Standby Mode in Less Than 1 µs
  • 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time
  • Basic Clock Module Configurations
    • Internal Frequencies up to 16 MHz With Four Calibrated Frequencies to ±1%
    • Internal Very-Low-Power Low-Frequency Oscillator
    • 32-kHz Crystal
    • High-Frequency (HF) Crystal up to 16 MHz
    • Resonator
    • External Digital Clock Source
    • External Resistor
  • 16-Bit Timer0_A3 With Three Capture/Compare Registers
  • 16-Bit Timer1_A2 With Two Capture/Compare Registers
  • On-Chip Comparator for Analog Signal Compare Function or Slope Analog-to-Digital (A/D) Conversion
  • 10-Bit 200-ksps A/D Converter With Internal Reference, Sample-and-Hold, Autoscan, and Data Transfer Controller
  • Universal Serial Communication Interface
    • Enhanced UART Supporting Auto-Baudrate Detection (LIN)
    • IrDA Encoder and Decoder
    • Synchronous SPI
    • I2C™
  • Brownout Detector
  • Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
  • Bootstrap Loader
  • On-Chip Emulation Module
  • Family Members Include:
    • MSP430F2132: 8KB + 256B Flash Memory, 512B RAM
    • MSP430F2122: 4KB + 256B Flash Memory, 512B RAM
    • MSP430F2112: 2KB + 256B Flash Memory, 256B RAM
  • Available in 28-Pin TSSOP (PW) and 32-Pin QFN (RHB or RTV) Packages
  • For Complete Module Descriptions, See the MSP430x2xx Family User's Guide, Literature Number SLAU144

查看更多内容

参数 与其它产品相比 MSP430F2x/4x

 
Non-volatile Memory (KB)
RAM (KB)
ADC
GPIO Pins (#)
I2C
SPI
UART
Comparators (#)
Package Group
Timers - 16-bit
Bootloader (BSL)
Special I/O
Operating Temperature Range (C)
Package Size: mm2:W x L (PKG)
Features
MSP430F2112 MSP430F2122 MSP430F2132
2    4    8   
0.25    0.5    0.5   
ADC10 - 8ch    ADC10 - 8ch    ADC10 - 8ch   
24    24    24   
1    1    1   
2    2    2   
1    1    1   
Yes    Yes    Yes   
TSSOP
VQFN
WQFN   
TSSOP
VQFN
WQFN   
TSSOP
VQFN
WQFN   
2    2    2   
UART    UART    UART   
N/A    N/A    N/A   
-40 to 105
-40 to 85   
-40 to 105
-40 to 85   
-40 to 85
-40 to 105   
28TSSOP: 62 mm2: 6.4 x 9.7(TSSOP)
32VQFN: 25 mm2: 5 x 5(VQFN)
32WQFN: 25 mm2: 5 x 5(WQFN)   
28TSSOP: 62 mm2: 6.4 x 9.7(TSSOP)
32VQFN: 25 mm2: 5 x 5(VQFN)
32WQFN: 25 mm2: 5 x 5(WQFN)   
28TSSOP: 62 mm2: 6.4 x 9.7(TSSOP)
32VQFN: 25 mm2: 5 x 5(VQFN)
32WQFN: 25 mm2: 5 x 5(WQFN)   
Watchdog
Temp Sensor
Brown Out Reset   
Watchdog
Temp Sensor
Brown Out Reset   
Watchdog
Temp Sensor
Brown Out Reset