The LPV531 is an extremely versatile operational amplifier. A single external resistor gives the system designer the ability to define the quiescent current, gain bandwidth product and output short circuit current. This innovative feature gives the system designer a method to dynamically switch the power level to optimize the performance of the op amp and meet the system design requirements.
The LPV531 can be tailored to a wide variety of applications. It offers the system designer the ability to dynamically trade off supply current for bandwidth by adjusting the current drawn from the ISEL pin using a DAC or switching in different value resistors in series with the ISEL pin. The LPV531 is capable of operating from 73 kHz, consuming only 5 μA, to as fast as 4.6 MHz, consuming only 425 μA. The input offset voltage is relatively independent and therefore is not significantly affected by the chosen power level.
Utilizing a CMOS input stage, the LPV531 achieves an input bias current of 50 fA and a common mode input voltage which extends from the negative rail to within 1.2V of the positive supply. The LPV531's rail-to-rail class AB output stage enables this op amp to offer maximum dynamic range at low supply voltage.
Offered in the space saving 6-pin SOT package, the LPV531 is ideal for use in handheld electronics and portable applications. The LPV531 is manufactured using TI’s advanced VIP50 process.
A fixed supply current/gain bandwidth is available upon request.
All trademarks are the property of their respective owners.
|Number of Channels (#)|
|Total Supply Voltage (Min) (+5V=5, +/-5V=10)|
|Total Supply Voltage (Max) (+5V=5, +/-5V=10)|
|GBW (Typ) (MHz)|
|Slew Rate (Typ) (V/us)|
|Vos (Offset Voltage @ 25C) (Max) (mV)|
|Iq per channel (Typ) (mA)|
|Vn at 1kHz (Typ) (nV/rtHz)|
|Operating Temperature Range (C)|
|Package Size: mm2:W x L (PKG)|
|Offset Drift (Typ) (uV/C)|
|Input Bias Current (Max) (pA)|
|CMRR (Typ) (dB)|
|Output Current (Typ) (mA)|
In to V-
|-40 to 85||-40 to 125|
|SOT-23-THIN | 6||SC70 | 5|
|6SOT-23-THIN: 8 mm2: 2.8 x 2.9 (SOT-23-THIN | 6)||5SC70: 4 mm2: 2.1 x 2 (SC70 | 5)|