LMV1099
- Noise Reduction Without DSP-Type Artifacts
- Adapting AGC (Automatic Gain Control) on Ambient Noise Level and Downlink Signal Strength
- Downlink Adjustable Noise-reducing High Pass Filter
- Separate Uplink and Downlink Enable Functions
- No Added Process Delays
- Low Power Consumption
- Shutdown Function
- Maximum AGC Limiter
- Differential Inputs and Outputs for Noise Immunity
- Earpiece Amplifier
- Available in a 25-Bump DSBGA Package
Key Specifications
- Uplink Far Field Noise Suppression (Electrical FFNSE at f = 1kHz) 33dB (typ)
- Near-Field SNR Enhancement 6 to 18dB (typ)
- Downlink SNRIE 16dB (typ)
- Supply Voltage Range 2.7V to 5.5V
- Supply Current (VDD = 3.6V) 3.8mA (typ)
- Shutdown Current 0.06μA (typ)
- Uplink PSRR (f = 217Hz) 106dB (typ)
- Downlink SNR (A-weighted) 102dB (typ)
- Downlink THD+N 0.03% (typ)
- Earpiece Output Power (RL = 32Ω) 83mW (typ)
All trademarks are the property of their respective owners.
The LMV1099 is an uplink and downlink voice intelligibility enhancing analog IC, ideally suited for mobile handsets. Uplink voice intelligibility is improved by rejecting far-field noise through a unique two-microphone solution. Downlink voice intelligibility is improved by enhancing the SNR (Signal-to-Noise Ratio) between the downlink voice and the ambient noise environment at the user’s earpiece.
The LMV1099 preserves uplink near-field voice signals within close range of the microphones while rejecting far-field acoustic noise greater than 0.5m from the microphones.
The LMV1099 also enhances downlink voice intelligibility by improving near-field SNR based on the user’s environment. The analog circuitry adapts dynamically to both the user’s ambient noise environment as well as the downlink signal amplitude to ensure optimum SNRI (signal-to-noise ratio improvement). The downlink path also provides uplink noise attenuation through an adjustable high pass filter before the SNR enhanced downlink voice reaches the user’s earpiece.
Unlike digital-based noise reduction solutions, the all-analog low power consuming LMV1099 increases both uplink and downlink voice intelligibility without DSP-type artifacts, distortions or processing delays.
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | Uplink Far Field Noise Suppression and Downlink SNR Enhancing Microphone Amp 数据表 (Rev. D) | 2013年 5月 2日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
封装 | 引脚 | 下载 |
---|---|---|
DSBGA (YZR) | 25 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点