主页 传感器 温度传感器和控制 IC 数字温度传感器
主页
传感器
温度传感器和控制 IC
数字温度传感器

LM80

不推荐用于新设计

串行接口 ACPI 兼容微处理器系统硬件监控器

立即订购
数据表
LM80 不推荐用于新设计
虽然我们会继续生产此产品供先前的设计使用，但不推荐在新设计中使用此产品。请考虑从这些替代产品中选择一款：
open-in-new 比较替代产品
功能优于比较器件，可直接替换
AMC80 正在供货 低功耗本地温度传感器，带风扇转速和电源电压监控器 Software compatible replacement with improved temperature sensing accuracy and lower power consumption.

LM80

不推荐用于新设计
数据表 立即订购

产品详情

Operating temperature range (°C) -25 to 125 Supply voltage (min) (V) 2.8 Supply voltage (max) (V) 5.75 Rating Catalog
Operating temperature range (°C) -25 to 125 Supply voltage (min) (V) 2.8 Supply voltage (max) (V) 5.75 Rating Catalog
TSSOP (PW) 24 49.92 mm² 7.8 x 6.4
  • Temperature Sensing
  • 7 Positive Voltage Inputs
  • 2 Programmable Fan Speed Monitoring Inputs
  • 10 mV LSB and 2.56V Input Range Accepts Outputs From Linear Temperature Sensors Such as the LM50
  • Chassis Intrusion Detector Input
  • WATCHDOG Comparison of all Monitored Values
  • Separate Input to Show Status in Interrupt Status Register of Additional External Temperature Sensors such as the LM56 or LM75
  • I2C Serial Bus Interface Compatibility
  • Shutdown Mode to Minimize Power Consumption
  • Programmable RST_OUT/OS pin: RST_OUT Provides a Reset Output; OS Provides an Interrupt Output Activated by an Overtemperature Shutdown Event

Key Specifications

  • Voltage Monitoring Error ±1% (Max)
  • Temperature Error (−25°C to +125°C) ±3°C (Max)
  • Supply Voltage Range 2.8 to 5.75 V
  • Supply Current: Operating 0.2 mA typ
  • Supply Current: Shutdown 15 µA typ
  • ADC Resolution 8 Bits
  • Temperature Resolution 0.5ºC

All trademarks are the property of their respective owners.

  • Temperature Sensing
  • 7 Positive Voltage Inputs
  • 2 Programmable Fan Speed Monitoring Inputs
  • 10 mV LSB and 2.56V Input Range Accepts Outputs From Linear Temperature Sensors Such as the LM50
  • Chassis Intrusion Detector Input
  • WATCHDOG Comparison of all Monitored Values
  • Separate Input to Show Status in Interrupt Status Register of Additional External Temperature Sensors such as the LM56 or LM75
  • I2C Serial Bus Interface Compatibility
  • Shutdown Mode to Minimize Power Consumption
  • Programmable RST_OUT/OS pin: RST_OUT Provides a Reset Output; OS Provides an Interrupt Output Activated by an Overtemperature Shutdown Event

Key Specifications

  • Voltage Monitoring Error ±1% (Max)
  • Temperature Error (−25°C to +125°C) ±3°C (Max)
  • Supply Voltage Range 2.8 to 5.75 V
  • Supply Current: Operating 0.2 mA typ
  • Supply Current: Shutdown 15 µA typ
  • ADC Resolution 8 Bits
  • Temperature Resolution 0.5ºC

All trademarks are the property of their respective owners.

The LM80 provides 7 positive voltage inputs, temperature measurement, fan speed measurement, and hardware monitoring on an I2C interface. The LM80 performs WATCHDOG comparisons of all measured values and an open-drain interrupt output becomes active when any values exceed programmed limits. A Chassis Intrusion input is provided to monitor and reset an external circuit designed to latch a chassis intrusion event.

The LM80 is especially suited to interface to both linear and digital temperature sensors. The 10 mV LSB and 2.56 volt input range is ideal for accepting inputs from a linear sensor such as the LM50. The BTI is used as an input from either digital or thermostat sensors such as LM75 and LM56.

The LM80's 2.8V to 5.75V supply voltage range, low supply current, and I2C interface make it ideal for a wide range of applications. These include hardware monitoring and protection applications in personal computers, electronic test equipment, and office electronics.

The LM80 provides 7 positive voltage inputs, temperature measurement, fan speed measurement, and hardware monitoring on an I2C interface. The LM80 performs WATCHDOG comparisons of all measured values and an open-drain interrupt output becomes active when any values exceed programmed limits. A Chassis Intrusion input is provided to monitor and reset an external circuit designed to latch a chassis intrusion event.

The LM80 is especially suited to interface to both linear and digital temperature sensors. The 10 mV LSB and 2.56 volt input range is ideal for accepting inputs from a linear sensor such as the LM50. The BTI is used as an input from either digital or thermostat sensors such as LM75 and LM56.

The LM80's 2.8V to 5.75V supply voltage range, low supply current, and I2C interface make it ideal for a wide range of applications. These include hardware monitoring and protection applications in personal computers, electronic test equipment, and office electronics.
open-in-new 查找其他 数字温度传感器
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 2
类型 标题 下载最新的英语版本 日期
* 数据表 LM80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor 数据表 (Rev. F) 2013年 3月 22日
应用手册 Applying I2C-Compatible Temperature Sensors in Systems With Slow Clock Edges (Rev. A) 2013年 5月 6日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

驱动程序或库

LM80SW-LINUX — 用于 LM80 的 Linux 驱动程序

Linux 驱动程序支持 LM80 系列的系统硬件监控器。Linux 驱动程序支持通过 I2C 总线进行通信，并可与硬件监控子系统交互。
Linux 主线状态

在 Linux 主线中提供：是
可通过 git.ti.com 获取：不适用

支持的器件：
  • lm80
  • lm96080
Linux 源文件

与该器件关联的文件为：

  1. drivers/hwmon/lm80.c
  2. Documentation/devicetree/bindings/i2c/trivial-devices.txt
  3. Documentation/hwmon/lm80
源文件

drivers/hwmon/lm80.c

Linux 器件树文档

(...)

查看选项
封装 引脚 下载
TSSOP (PW) 24 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频