LM4921
- 16-Bit Resolution Stereo DAC
- I2S Digital Audio Data Serial Interface
- SPI Serial Interface (Control Register)
- Volume Control (32 steps; 1.5 dB Increments)
- Up to 50mW/Channel Stereo Headphone Amplifier
- Zero Crossing Detection for Silent Attenuation Steps
- 2.6VDC to 5.0VDC Digital Supply Voltage Range
- 2.6VDC to 5.5VDC Analog Supply Voltage Range (See )
- Unity-Gain Stable Headphone Amplifiers
- Available in the 20-bump DSBGA Package
Key Specifications
- PSRR at 217Hz, A/DVDD = 3V: 52dB (typ)
- POUT at AVDD = 3.0V, 32Ω
- < 0.05% THD: 13mW (typ)
- < 0.05% THD: 26mW (typ)
- Supply Voltage Range
- DVDD: 2,6V to 5.0V
- AVDD: (See ) 2.6V to 5.5V
- Shutdown Current: 1µA (typ)
All trademarks are the property of their respective owners.
The LM4921 combines a 16-bit resolution stereo I2S input digital-to-analog converter (DAC) with a stereo headphone audio power amplifier. It is primarily designed for demanding applications in mobile phones and other portable communication device applications. The LM4921 features an I2S serial interface for the digital audio information and a 16-bit SPI serial interface for internal register control and communication. With AVDD and DVDD = 3.0VDC and driving a 32Ω single-ended load to a 26mWRMS output level the distortion (THD+N) of the LM4921 will be less than 0.5%. The LM4921 also features a programmable 32-step digital volume control accessed through an SPI interface.
Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. It is, therefore, ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.
The LM4921 features a low-power consumption shutdown mode, and also has an internal thermal shutdown protection mechanism.
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | Low Voltage I 2 S 16-Bit Stereo DAC w/Stereo HP Pwr Amp & Vol Cntrl 数据表 (Rev. E) | 2013年 5月 1日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
封装 | 引脚 | 下载 |
---|---|---|
DSBGA (YZR) | 20 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点