主页 音频 音频放大器 耳机放大器
主页
音频
音频放大器
耳机放大器

LM48822

正在供货

具有 I2C 控制接口的 35mW 立体声模拟输入耳机放大器

立即订购
数据表

LM48822

正在供货
数据表 立即订购

产品详情

Output power (W) 0.04 Analog supply (min) (V) 2.4 Analog supply voltage (max) (V) 5.5 Load (min) (Ω) 16 PSRR (dB) 110 Rating Catalog Operating temperature range (°C) -40 to 85 Headphone channels Stereo Volume control Yes Shutdown current (ISD) (µA) 0.06 Architecture Class-AB (ground-centered) Iq per channel (typ) (mA) 1.7
Output power (W) 0.04 Analog supply (min) (V) 2.4 Analog supply voltage (max) (V) 5.5 Load (min) (Ω) 16 PSRR (dB) 110 Rating Catalog Operating temperature range (°C) -40 to 85 Headphone channels Stereo Volume control Yes Shutdown current (ISD) (µA) 0.06 Architecture Class-AB (ground-centered) Iq per channel (typ) (mA) 1.7
DSBGA (YZR) 16 5.0625 mm² 2.25 x 2.25
  • Ground Referenced Outputs – Eliminates Output Coupling Capacitors
  • Common-Mode Sense
  • Ultra-High PSRR
  • I2C Volume and Mode Control
  • High Output Impedance in Shutdown
  • Differential Inputs
  • Advanced Click-and-Pop Suppression
  • Low Supply Current
  • Minimum External Components
  • Micro-Power Shutdown
  • Available in Space-Saving 16-Bump DSBGA Package

Key Specifications

  • Output Power/Channel at VDD = 3.6V
    • RL = 16Ω, THD+N ≤ 1%: 35mW (typ)
  • Output Power/Channel at VDD = 3.6V
    • RL = 32Ω, THD+N ≤ 1%: 40mW (typ)
  • Quiescent Power Supply Current at 3.6V: 3.5mA (typ)
  • PSRR at 217Hz: 110dB (typ)
  • Shutdown Current: 0.06μA (typ)

is a trademark of Texas Instruments. All trademarks are the property of their respective owners.

  • Ground Referenced Outputs – Eliminates Output Coupling Capacitors
  • Common-Mode Sense
  • Ultra-High PSRR
  • I2C Volume and Mode Control
  • High Output Impedance in Shutdown
  • Differential Inputs
  • Advanced Click-and-Pop Suppression
  • Low Supply Current
  • Minimum External Components
  • Micro-Power Shutdown
  • Available in Space-Saving 16-Bump DSBGA Package

Key Specifications

  • Output Power/Channel at VDD = 3.6V
    • RL = 16Ω, THD+N ≤ 1%: 35mW (typ)
  • Output Power/Channel at VDD = 3.6V
    • RL = 32Ω, THD+N ≤ 1%: 40mW (typ)
  • Quiescent Power Supply Current at 3.6V: 3.5mA (typ)
  • PSRR at 217Hz: 110dB (typ)
  • Shutdown Current: 0.06μA (typ)

is a trademark of Texas Instruments. All trademarks are the property of their respective owners.

The LM48822 is a single supply, ground-referenced stereo headphone amplifier designed for portable devices, such as cell phones, where board space is at a premium. The LM48822 features TI’s ground-referenced architecture, which eliminates the large DC blocking capacitor required by traditional headphone amplifiers, saving board space and minimizing system cost.

The LM48822 features common-mode sensing that corrects for any differences between the amplifier ground and the potential at the headphone return terminal, minimizing noise created by any ground mismatches.

The LM48822 delivers 35mW/channel into a 16Ω load with <1% THD+N with a 3.6V supply. High power supply rejection ratio (PSRR), of 110dB at 217Hz, allows the device to operate in noisy environments without additional power supply conditioning. Flexible power supply requirements allow operation from 2.4V to 5.5V. The LM48822 has a differential inputs for improved noise rejection. High output impedance in Shutdown mode, combined with a charge pump-only mode allows the LM48822's outputs to be driven by an external source without degrading the source signal. Additionally, the LM48822 features a 64-step I2C volume control and mute function. The low power Shutdown mode reduces supply current consumption to 0.06µA.

Superior click and pop suppression eliminates audible transients on power-up/down and during shutdown. The LM48822 is available in an ultra-small 16-bump DSBGA package (2mmx2mm).

The LM48822 is a single supply, ground-referenced stereo headphone amplifier designed for portable devices, such as cell phones, where board space is at a premium. The LM48822 features TI’s ground-referenced architecture, which eliminates the large DC blocking capacitor required by traditional headphone amplifiers, saving board space and minimizing system cost.

The LM48822 features common-mode sensing that corrects for any differences between the amplifier ground and the potential at the headphone return terminal, minimizing noise created by any ground mismatches.

The LM48822 delivers 35mW/channel into a 16Ω load with <1% THD+N with a 3.6V supply. High power supply rejection ratio (PSRR), of 110dB at 217Hz, allows the device to operate in noisy environments without additional power supply conditioning. Flexible power supply requirements allow operation from 2.4V to 5.5V. The LM48822 has a differential inputs for improved noise rejection. High output impedance in Shutdown mode, combined with a charge pump-only mode allows the LM48822's outputs to be driven by an external source without degrading the source signal. Additionally, the LM48822 features a 64-step I2C volume control and mute function. The low power Shutdown mode reduces supply current consumption to 0.06µA.

Superior click and pop suppression eliminates audible transients on power-up/down and during shutdown. The LM48822 is available in an ultra-small 16-bump DSBGA package (2mmx2mm).
filter 查找其他 耳机放大器
下载

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 1
类型 标题 下载最新的英语版本 日期
* 数据表 Gnd-Ref Ultra Hi PSRR, 35mW/Ch Stereo Hdph Amp w/Com Mode Sense & I2C Vol Ctrl 数据表 (Rev. C) 2013年 5月 3日

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频