主页 音频 音频放大器 扬声器放大器
主页
音频
音频放大器
扬声器放大器

LM4665

正在供货

具有可选增益的 1.4W 单声道、模拟输入 D 类音频放大器

立即订购
数据表

LM4665

正在供货
数据表 立即订购

产品详情

Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.7 Load (min) (Ω) 4 Output power (W) 1.4 THD + N at 1 kHz (%) 0.8 Iq (typ) (mA) 14 Control interface Hardware Closed/open loop Open Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 PSRR (dB) 52 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.7 Load (min) (Ω) 4 Output power (W) 1.4 THD + N at 1 kHz (%) 0.8 Iq (typ) (mA) 14 Control interface Hardware Closed/open loop Open Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 PSRR (dB) 52 Operating temperature range (°C) -40 to 85
DSBGA (YZR) 9 3.0625 mm² 1.75 x 1.75
  • No Output Filter Required for Inductive Transducers
  • Selectable Gain of 6dB (2V/V) or 12dB (4V/V)
  • Very Fast Turn On Time: 5ms (typ)
  • User Selectable Shutdown High or Low Logic Level
  • Minimum External Components
  • "Click and Pop" Suppression Circuitry
  • Micro-Power Shutdown Mode
  • Short Circuit Protection
  • DSBGA, WSON, and VSSOP Packages (No Heat Sink Required)

Key Specifications

  • Efficiency at 100mW into 8Ω Transducer 75%(typ)
  • Efficiency at 400mW into 8Ω Transducer 80%(typ)
  • Total Quiescent Power Supply Current (3V) 3mA(typ)
  • Total Shutdown Power Supply Current (3V) 0.01µA(typ)
  • Single Supply Range (VSSOP & WSON) 2.7V to 5.5V
  • Single Supply Range (DSBGA) (Note 11) 2.7V to 3.8V

All trademarks are the property of their respective owners.

  • No Output Filter Required for Inductive Transducers
  • Selectable Gain of 6dB (2V/V) or 12dB (4V/V)
  • Very Fast Turn On Time: 5ms (typ)
  • User Selectable Shutdown High or Low Logic Level
  • Minimum External Components
  • "Click and Pop" Suppression Circuitry
  • Micro-Power Shutdown Mode
  • Short Circuit Protection
  • DSBGA, WSON, and VSSOP Packages (No Heat Sink Required)

Key Specifications

  • Efficiency at 100mW into 8Ω Transducer 75%(typ)
  • Efficiency at 400mW into 8Ω Transducer 80%(typ)
  • Total Quiescent Power Supply Current (3V) 3mA(typ)
  • Total Shutdown Power Supply Current (3V) 0.01µA(typ)
  • Single Supply Range (VSSOP & WSON) 2.7V to 5.5V
  • Single Supply Range (DSBGA) (Note 11) 2.7V to 3.8V

All trademarks are the property of their respective owners.

The LM4665 is a fully integrated single-supply high efficiency switching audio amplifier. It features an innovative modulator that eliminates the LC output filter used with typical switching amplifiers. Eliminating the output filter reduces parts count, simplifies circuit design, and reduces board area. The LM4665 processes analog inputs with a delta-sigma modulation technique that lowers output noise and THD when compared to conventional pulse width modulators.

The LM4665 is designed to meet the demands of mobile phones and other portable communication devices. Operating on a single 3V supply, it is capable of driving 8Ω transducer loads at a continuous average output of 400mW with less than 2%THD+N.

The LM4665 has high efficiency with an 8Ω transducer load compared to a typical Class AB amplifier. With a 3V supply, the IC's efficiency for a 100mW power level is 75%, reaching 80% at 400mW output power.

The LM4665 features a low-power consumption shutdown mode. Shutdown may be enabled by either a logic high or low depending on the mode selection. Connecting the Shutdown Mode pin to either VDD (high) or GND (low) enables the Shutdown pin to be driven in a likewise manner to activate shutdown.

The LM4665 has fixed selectable gain of either 6dB or 12dB. The LM4665 has short circuit protection against a short from the outputs to VDD, GND or across the outputs.

The LM4665 is a fully integrated single-supply high efficiency switching audio amplifier. It features an innovative modulator that eliminates the LC output filter used with typical switching amplifiers. Eliminating the output filter reduces parts count, simplifies circuit design, and reduces board area. The LM4665 processes analog inputs with a delta-sigma modulation technique that lowers output noise and THD when compared to conventional pulse width modulators.

The LM4665 is designed to meet the demands of mobile phones and other portable communication devices. Operating on a single 3V supply, it is capable of driving 8Ω transducer loads at a continuous average output of 400mW with less than 2%THD+N.

The LM4665 has high efficiency with an 8Ω transducer load compared to a typical Class AB amplifier. With a 3V supply, the IC's efficiency for a 100mW power level is 75%, reaching 80% at 400mW output power.

The LM4665 features a low-power consumption shutdown mode. Shutdown may be enabled by either a logic high or low depending on the mode selection. Connecting the Shutdown Mode pin to either VDD (high) or GND (low) enables the Shutdown pin to be driven in a likewise manner to activate shutdown.

The LM4665 has fixed selectable gain of either 6dB or 12dB. The LM4665 has short circuit protection against a short from the outputs to VDD, GND or across the outputs.
open-in-new 查找其他 扬声器放大器
下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相同但引脚有所不同
LM4673 正在供货 2.65W 单声道、模拟输入 D 类扬声器放大器 Higher power output

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 5
类型 标题 下载最新的英语版本 日期
* 数据表 LM4665  Filterless High Efficiency 1W Switching Audio Amplifier 数据表 (Rev. E) 2013年 5月 2日
应用手册 Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) 2019年 8月 26日
应用手册 AN-1849 An Audio Amplifier Power Supply Design (Rev. C) 2019年 6月 27日
应用手册 AN-1737 Managing EMI in Class D Audio Applications (Rev. A) 2013年 5月 1日
白皮书 Digital Microphones - Applications and System Partitioning 2003年 4月 1日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
封装 引脚 下载
DSBGA (YZR) 9 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频