DS90CR485
- Up to 6.384-Gbps Throughput
- 66-MHz to 133-MHz Input Clock Support
- Reduces Cable and Connector Size and Cost
- Pre‐Emphasis Reduces Cable Loading Effects
- DC Balance Reduces ISI Distortion
- 24-Bit Double Edge Inputs
- 3-V Tolerant LVCMOS/LVTTL Inputs
- Low Power, 2.5-V Supply
- Flow-Through Pinout
- 100-Pin TQFP Package
- Conforms With TIA/EIA‐644-A LVDS Standard
The DS90CR485 device serializes the 24 LVCMOS/LVTTL double-edge inputs (48 bits data latched in per clock cycle) onto eight Low Voltage Differential Signaling (LVDS) streams. A phase-locked transmit clock is also in parallel with the data streams over a 9th LVDS link. The reduction of the wide TTL bus to a few LVDS lines reduces cable and connector size and cost. The double-edge input strobes data on both the rising and falling edges of the clock. This minimizes the pin count required and simplifies PCB routing between the host chip and the serializer.
This chip can help resolve EMI and interconnect size problems for high throughput point-to-point applications.
The DS90CR485 is compatible with the DS90CR486 Channel-Link receiver. The device is also backward-compatible with other Channel-Link receivers such as the DS90CR482 and DS90CR484.
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | DS90CR485 133 MHz、48 位频道链接串行器(6.384 Gbps) 数据表 (Rev. E) | 2019年 9月 10日 | |||
应用手册 | High-Speed Layout Guidelines for Reducing EMI for LVDS SerDes Designs | 2018年 11月 9日 | ||||
EVM 用户指南 | 48-bit Channel Link Serializer Deserializer Evaluation Board 133MHz | 2012年 1月 26日 | ||||
设计指南 | Channel Link I Design Guide | 2007年 3月 29日 | ||||
应用手册 | Multi-Drop Channel-Link Operation | 2004年 10月 4日 | ||||
白皮书 | The Many Flavors of LVDS | 2002年 2月 1日 | ||||
应用手册 | CHANNEL LINK Moving and Shaping Information In Point-To-Point Applications | 1998年 10月 5日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
TINA-TI — 基于 SPICE 的模拟仿真程序
TINA-TI 安装需要大约 500MB。直接安装,如果想卸载也很容易。我们相信您肯定会爱不释手。
TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能,但不支持完整版 TINA 所提供的某些其他功能。
如需获取可用 TINA-TI 模型的完整列表,请参阅:SpiceRack - 完整列表
需要 HSpice (...)
封装 | 引脚 | 下载 |
---|---|---|
QFP (NEZ) | 100 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点