DS34RT5110
- Optimized for HDMI/DVI Repeater Applications
- TMDS compatible Inputs with Configurable Receive Equalization Supporting Data Rates up to 3.4 Gbps
- TMDS compatible Outputs with Configurable Transmit De-Emphasis
- Dedicated CDR on Each Data Channel Reduces Jitter Transfer, Enabling Multiple Devices to be Cascaded without Impairing Signal Fidelity
- Capable of Multi-Hop Extension of HDMI/DVI Applications at Data Rates between 250 Mbps and 3.4 Gbps
- Resistor Adjustable Differential Output Voltage for AC Coupled Cat5e and Cat6 Extension Applications
- 2 Equalizer Settings for a Wide Range of Cable Reaches at Different Data Rates
- Total Output Jitter of 0.09 UI at 2.25 Gbps
- Total Output Jitter of 0.10 UI at 3.4 Gbps
- DVI 1.0 and HDMI v1.3a Compatible TMDS Source and Sink Interface
- 7 mm x 7 mm 48 Pin WQFN Package
- >8 kV HBM ESD Protection
- 0 °C to +70 °C Operating Temperature
All trademarks are the property of their respective owners.
The DS34RT5110 is a 10.2 Gbps (3 x 3.4 Gbps) high performance re-clocking device that supports 3 Transition Minimized Differential Signaling (TMDS) data channels and a single clock channel over DVI™ v1.0, and HDMI™ v1.3a data rates up to 3.4 Gbps for each data channel. The device incorporates a configurable receive equalizer, a clock and data recovery (CDR) circuit and a de-emphasis driver on each data channel. The clock channel feeds a high-performance phase-locked loop (PLL) that regenerates a low jitter output clock for data recovery.
The DS34RT5110 equalizes and retimes greater than 25 meters 28 AWG of HDMI cable for 1080p resolution with 12 bit deep color depth (2.25 Gbps), to a low jitter version of the clock and data signal outputs, reducing both deterministic and random jitter. Several devices can be cascaded for long links without degrading signal fidelity. Obtaining total jitter is 0.09 UI or less over the supported data rates. This low level of output jitter provides system designers with extra margin and flexibility when working with stringent timing budgets.
The transmitter supports configurable transmit de-emphasis so the output can be optimized for driving additional lengths of cables or FR4 traces.
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | DS34RT5110 DVI, HDMI Retimer with Input Equalization and Output De-Emphasis 数据表 (Rev. G) | 2013年 4月 15日 | |||
应用手册 | Using DS34RT5110 HDMI Cable Equalizer for 4K Resolution | 2015年 1月 14日 | ||||
用户指南 | DS34RT110-EVKH: HDMI Single Repeater Demo Kit for HDMI Cables (Rev. A) | 2013年 10月 30日 | ||||
用户指南 | DS34RT5110-EVKC: CAT5 Multi-hop Demo Kit for HDMI Cables (Rev. A) | 2013年 10月 1日 | ||||
应用手册 | Extend HDMI Cable Reach Using DS16EV5110A, DS22EV5110, & DS34RT5110 Equalizers (Rev. B) | 2013年 4月 26日 | ||||
应用手册 | App Note 1613 Extending HDMI Cable Reach Using DS16EV5110A, DS22EV | 2009年 10月 16日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
TINA-TI — 基于 SPICE 的模拟仿真程序
TINA-TI 安装需要大约 500MB。直接安装,如果想卸载也很容易。我们相信您肯定会爱不释手。
TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能,但不支持完整版 TINA 所提供的某些其他功能。
如需获取可用 TINA-TI 模型的完整列表,请参阅:SpiceRack - 完整列表
需要 HSpice (...)
封装 | 引脚 | 下载 |
---|---|---|
WQFN (RHS) | 48 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点