主页
主页

COP8SGR7

已停产

具有 32k 存储器、两个比较器和 USART 的 8 位 CMOS OTP

立即订购
数据表

COP8SGR7

已停产
数据表 立即订购

产品详情

我们无法提供此信息。请参阅产品数据表。
PLCC (FN) 44 307.3009 mm² 17.53 x 17.53 SOIC (DW) 28 184.37 mm² 17.9 x 10.3
  • Low Cost 8‐Bit Microcontroller
  • Quiet Design (Low Radiated Emissions)
  • Multi-Input Wakeup Pins with Optional Interrupts (8 pins)
  • Mask Selectable Clock Options
    • Crystal Oscillator
    • Crystal Oscillator Option with On-Chip Bias Resistor
    • External Oscillator
    • Internal R/C Oscillator
  • Internal Power-On-Reset—User Selectable
  • WATCHDOG and Clock Monitor Logic—User Selectable
  • Eight High Current Outputs
  • 256 or 512 Bytes On-Board RAM
  • 8k to 32k ROM or OTP EPROM with Security Feature

CPU Features

  • Versatile Easy to Use Instruction Set
  • 0.67 μs Instruction Cycle Time
  • Fourteen Multi-Source Vectored Interrupts Servicing
    • External Interrupt / Timers T0 — T3
    • MICROWIRE/PLUS Serial Interface
    • Multi-Input Wake Up
    • Software Trap
    • USART (2; 1 Receive and 1 Transmit)
    • Default VIS (Default Interrupt)
  • 8-Bit Stack Pointer SP (Stack in RAM)
  • Two 8-bit Register Indirect Data Memory Pointers
  • True Bit Manipulation
  • BCD Arithmetic Instructions

Peripheral Features

  • Multi-Input Wakeup Logic
  • Three 16-bit timers (T1 — T3), each with two 16-bit registers supporting:
    • Processor Independent PWM mode
    • External Event Counter mode
    • Input Capture mode
  • Idle Timer (T0)
  • MICROWIRE/PLUS Serial Interface (SPI Compatible)
  • Full Duplex USART
  • Two Analog Comparators

I/O Features

  • Software Selectable I/O Options (TRI-STATE Output,Push-Pull Output, Weak Pull-Up Input, and High Impedance Input)
  • Schmitt Trigger Inputs on Ports G and L
  • Eight High Current Outputs
  • Packages: 28 SOIC with 24 I/O pins, 40 PDIP with 36 I/O pins, 44 PLCC, LQFP and WQFN with 40 I/O pins

Fully Static CMOS Design

  • Low Current Drain (typically < 4 μA)
  • Two Power Saving Modes: HALT and IDLE

Temperature Range

  • −40°C to +85°C, −40°C to +125°C

Development Support

  • Windowed Packages for PDIP and PLCC
  • Real Time Emulation and Debug Tools Available

All trademarks are the property of their respective owners.
  • Low Cost 8‐Bit Microcontroller
  • Quiet Design (Low Radiated Emissions)
  • Multi-Input Wakeup Pins with Optional Interrupts (8 pins)
  • Mask Selectable Clock Options
    • Crystal Oscillator
    • Crystal Oscillator Option with On-Chip Bias Resistor
    • External Oscillator
    • Internal R/C Oscillator
  • Internal Power-On-Reset—User Selectable
  • WATCHDOG and Clock Monitor Logic—User Selectable
  • Eight High Current Outputs
  • 256 or 512 Bytes On-Board RAM
  • 8k to 32k ROM or OTP EPROM with Security Feature

CPU Features

  • Versatile Easy to Use Instruction Set
  • 0.67 μs Instruction Cycle Time
  • Fourteen Multi-Source Vectored Interrupts Servicing
    • External Interrupt / Timers T0 — T3
    • MICROWIRE/PLUS Serial Interface
    • Multi-Input Wake Up
    • Software Trap
    • USART (2; 1 Receive and 1 Transmit)
    • Default VIS (Default Interrupt)
  • 8-Bit Stack Pointer SP (Stack in RAM)
  • Two 8-bit Register Indirect Data Memory Pointers
  • True Bit Manipulation
  • BCD Arithmetic Instructions

Peripheral Features

  • Multi-Input Wakeup Logic
  • Three 16-bit timers (T1 — T3), each with two 16-bit registers supporting:
    • Processor Independent PWM mode
    • External Event Counter mode
    • Input Capture mode
  • Idle Timer (T0)
  • MICROWIRE/PLUS Serial Interface (SPI Compatible)
  • Full Duplex USART
  • Two Analog Comparators

I/O Features

  • Software Selectable I/O Options (TRI-STATE Output,Push-Pull Output, Weak Pull-Up Input, and High Impedance Input)
  • Schmitt Trigger Inputs on Ports G and L
  • Eight High Current Outputs
  • Packages: 28 SOIC with 24 I/O pins, 40 PDIP with 36 I/O pins, 44 PLCC, LQFP and WQFN with 40 I/O pins

Fully Static CMOS Design

  • Low Current Drain (typically < 4 μA)
  • Two Power Saving Modes: HALT and IDLE

Temperature Range

  • −40°C to +85°C, −40°C to +125°C

Development Support

  • Windowed Packages for PDIP and PLCC
  • Real Time Emulation and Debug Tools Available

All trademarks are the property of their respective owners.

The COP8SG Family ROM and OTP based microcontrollers are highly integrated COP8 Feature core devices with 8k to 32k memory and advanced features including Analog comparators, and zero external components. These single-chip CMOS devices are suited for more complex applications requiring a full featured controller with larger memory, low EMI, two comparators, and a full-duplex USART. COP8SGx7 devices are 100% form-fit-function compatible OTP (One Time Programmable) versions for use in production or development of the COP8SGx5 ROM.

Erasable windowed versions (Q3) are available for use with a range of COP8 software and hardware development tools.

Family features include an 8-bit memory mapped architecture, 15 MHz CKI with 0.67 μs instruction cycle, 14 interrupts, three multi-function 16-bit timer/counters with PWM, full duplex USART, MICROWIRE/PLUS, two analog comparators, two power saving HALT/IDLE modes, MIWU, idle timer, on-chip R/C oscillator, high current outputs, user selectable options (WATCHDOG, 4 clock/oscillator modes, power-on-reset), 2.7V to 5.5V operation, program code security, and 28/40/44 pin packages.

The COP8SG Family ROM and OTP based microcontrollers are highly integrated COP8 Feature core devices with 8k to 32k memory and advanced features including Analog comparators, and zero external components. These single-chip CMOS devices are suited for more complex applications requiring a full featured controller with larger memory, low EMI, two comparators, and a full-duplex USART. COP8SGx7 devices are 100% form-fit-function compatible OTP (One Time Programmable) versions for use in production or development of the COP8SGx5 ROM.

Erasable windowed versions (Q3) are available for use with a range of COP8 software and hardware development tools.

Family features include an 8-bit memory mapped architecture, 15 MHz CKI with 0.67 μs instruction cycle, 14 interrupts, three multi-function 16-bit timer/counters with PWM, full duplex USART, MICROWIRE/PLUS, two analog comparators, two power saving HALT/IDLE modes, MIWU, idle timer, on-chip R/C oscillator, high current outputs, user selectable options (WATCHDOG, 4 clock/oscillator modes, power-on-reset), 2.7V to 5.5V operation, program code security, and 28/40/44 pin packages.
open-in-new 查找其他 非产品
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 14
类型 标题 下载最新的英语版本 日期
* 数据表 COP8SG Fam 8-Bit CMOS ROM Based and OTP Microc w/8k to 32k Mem, 2Comp & USART 数据表 (Rev. E) 2013年 3月 29日
应用手册 Replcing Dedictd Protocl Contrl w/Code Eff & Config Microc-Low Spd CAN Ntwk Apps 2004年 10月 4日
应用手册 AN-413 Disk Interface Design Guide and Users Manual 2004年 5月 14日
应用手册 AN-453 COPS Based Automobile Instrument Cluster 2004年 5月 14日
应用手册 AN-579 MICROWIRE/PLUS Serial Interface 2004年 5月 14日
应用手册 AN-587 C in Embedded Systems and the Microcontroller World 2004年 5月 14日
应用手册 AN-596 COP800 Mathpak 2004年 5月 14日
应用手册 AN-662 COP800 Based Automated Security/Monitoring System 2004年 5月 14日
应用手册 AN-663 Sound Effects for the COP800 Family 2004年 5月 14日
应用手册 AN-761 Electronic Fuzing 2004年 5月 14日
应用手册 AN-823 Time Keeping Using a COP800 Microcontroller 2004年 5月 14日
应用手册 AN-824 Eight Channel Eight Bit PWM Controller 2004年 5月 14日
应用手册 AN-952 Low Cost A/D Conversion Using COP800 2004年 5月 14日
应用手册 AN-329 Implementing an 8-Bit Buffer in COPS 2004年 5月 10日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

封装 引脚 下载
PLCC (FN) 44 查看选项
SOIC (DW) 28 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频