CC2431 用于 ZigBee/IEEE 802.15.4 无线传感器网络的片上系统 (SoC) 解决方案 | 德州仪器

用于 ZigBee/IEEE 802.15.4 无线传感器网络的片上系统 (SoC) 解决方案

用于 ZigBee/IEEE 802.15.4 无线传感器网络的片上系统 (SoC) 解决方案 - CC2431
数据表 勘误表


由替代品 CC2531 – 该器件相比较而言有相似的功能但并不具有等效功能。 CC2531 offers 256KB RAM option, lower power, improved sensitivity, and up-to-date software support. CC2531 does not provide on board location feature.

TI 不建议在新设计中使用此器件。该产品可持续生产,以支持现有客户。


The CC2431 is a true System-On-Chip (SOC) for wireless sensor networking ZigBee®/IEEE 802.15.4 solutions. The chip includes a location detection hardware module that can be used in so-called blind nodes (i.e. nodes with unknown location) to receive signals from nodes with known location’s. Based on this the location engine calculates an estimate of a blind node’s position. The CC2431 enables ZigBee® nodes to be built with very low total bill-of-material costs. The CC2431 combines the excellent performance of the leading CC2420 RF transceiver with an industry-standard enhanced 8051 MCU, 128 KB flash memory, 8 KB RAM and many other powerful features. Combined with the industry leading ZigBee® protocol stack (Z-Stack™) from Texas Instruments, the CC2431 provides the market’s most competitive ZigBee® solution.

The CC2431 is highly suited for systems where ultra low power consumption is required. This is achieved by various operating modes. Short transition times between these modes further ensure low power consumption.


  • Location Engine calculates the location of a node in a network
  • High performance and low power 8051 microcontroller core.
  • 2.4 GHz IEEE 802.15.4 compliant RF transceiver (industry leading CC2420 radio core.
  • ZigBee® protocol stack (Z-Stack™) from Texas Instruments includes support for CC2431’s location engine.
  • Excellent receiver sensitivity and robustness to interferers
  • 128 KB in-system programmable flash
  • 8 KB RAM, 4 KB with data retention in all power modes
  • Powerful DMA functionality
  • Very few external components
  • Only a single crystal needed for mesh network systems
  • Low current consumption (RX: 27mA, TX: 27mA, microcontroller running at 32 MHz)
  • Only 0.5µA current consumption in power-down mode, where external interrupts or the RTC can wake up the system
  • 0.3µA current consumption in power-down mode, where external interrupts can wake up the system
  • Very fast transition times from low-power modes to active mode enables ultra low average power consumption in low duty-cycle systems
  • CSMA/CA hardware support
  • Wide supply voltage range (2.0V - 3.6V)
  • Digital RSSI / LQI support
  • Battery monitor and temperature sensor
  • ADC with up to eight inputs and configurable resolution
  • 128-bit AES security coprocessor
  • Two powerful USARTs with support for several serial protocols.
  • Hardware debug support
  • Watchdog timer
  • One IEEE 802.15.4 MAC Timer, one general 16-bit timer and two 8-bit timers
  • RoHS compliant 7x7mm QLP48 package
  • 21 general I/O pins, two with 20mA sink/source capability
  • Powerful and flexible development tools available
  • Applications
    • ZigBee® systems
    • 2.4 GHz IEEE 802.15.4 systems
    • Home/building automation
    • Industrial Control and Monitoring
    • Low power wireless sensor networks
    • Access Control
    • PC peripherals
    • Set-top boxes and remote controls
    • Consumer Electronics
    • Container/Vehicle Tracking
    • Active RFID
    • Inventory Control