主页 无线连接 其他无线产品
主页
无线连接
其他无线产品

CC2400

不推荐用于新设计

具有硬件扩展特性的低成本和低功耗单芯片 2.4GHz ISM 频带收发器

立即订购
数据表
勘误
CC2400 不推荐用于新设计
该产品会持续为现有客户提供。新设计应考虑替代产品。
open-in-new 比较替代产品
功能与比较器件相似
CC2500 正在供货 为 2.4GHz ISM 频带内的低功耗无线应用而设计的低成本、低功耗 2.4GHz 射频收发器 This product is a newer device with improved functionality.

CC2400

不推荐用于新设计
数据表 立即订购

产品详情

Operating temperature range (°C) -40 to 85 Rating Catalog
Operating temperature range (°C) -40 to 85 Rating Catalog
VQFN (RSU) 48 49 mm² 7 x 7
  • True single-chip 2.4 GHz RF transceiver with baseband modem
  • 10 kbps, 250 kbps and 1 Mbps over-the-air data rates
  • Low current consumption (RX: 24 mA)
  • Low core supply voltage (1.8 V)
  • Programmable output power
  • No external RF switch / filter needed
  • I/Q low-IF receiver
  • I/Q direct up-conversion transmitter
  • Few external components
  • FIFO allows bursting of data
  • Packet handling hardware
  • Data buffering
  • Digital RSSI output
  • Small size (QFN 48 package), 7x7 mm
  • Reference design complies with EN 300 328, EN 300 440, FCC CFR47 part 15 and ARIB STD-T66
  • Powerful and flexible development tools available
  • Easy-to-use software for generating the CC2400 configuration data
  • Applications
    • 2.4 GHz MHz ISM/SRD band systems
    • Game controllers
    • Sports and leisure equipment
    • Wireless audio
    • PC peripherals
    • Advanced toys
  • True single-chip 2.4 GHz RF transceiver with baseband modem
  • 10 kbps, 250 kbps and 1 Mbps over-the-air data rates
  • Low current consumption (RX: 24 mA)
  • Low core supply voltage (1.8 V)
  • Programmable output power
  • No external RF switch / filter needed
  • I/Q low-IF receiver
  • I/Q direct up-conversion transmitter
  • Few external components
  • FIFO allows bursting of data
  • Packet handling hardware
  • Data buffering
  • Digital RSSI output
  • Small size (QFN 48 package), 7x7 mm
  • Reference design complies with EN 300 328, EN 300 440, FCC CFR47 part 15 and ARIB STD-T66
  • Powerful and flexible development tools available
  • Easy-to-use software for generating the CC2400 configuration data
  • Applications
    • 2.4 GHz MHz ISM/SRD band systems
    • Game controllers
    • Sports and leisure equipment
    • Wireless audio
    • PC peripherals
    • Advanced toys

The CC2400 is a true single-chip 2.4 GHz RF transceiver designed for low-power and low-voltage wireless applications. The RF transceiver is integrated with a baseband modem supporting data rates up to 1 Mbps.

The CC2400 is a low-cost, highly integrated solution enabling robust wireless communication in the 2.4 - 2.4835 GHz unlicensed ISM band. It is intended for systems compliant with world-wide regulations covered by EN 300 440 (Europe), CFR47 Part 15 (US) and ARIB STD-T66 (Japan).

Targeting a wide range of applications at 2.4 GHz, the CC2400 supports over-the-air data rates of 10 kbps, 250 kbps and 1 Mbps without requiring any modifications to the hardware.

The CC2400 provides extensive hardware support for packet handling, data buffering, burst transmissions, data coding and error detection reducing the workload on the host microcontroller.

The main operating parameters of CC2400 can be programmed via an SPI-bus. In a typical system CC2400 will be used together with a microcontroller and a few external, passive components.

CC2400 is based on Chipcon’s SmartRF®-03 technology in 0.18 µm CMOS.

The CC2400 is a true single-chip 2.4 GHz RF transceiver designed for low-power and low-voltage wireless applications. The RF transceiver is integrated with a baseband modem supporting data rates up to 1 Mbps.

The CC2400 is a low-cost, highly integrated solution enabling robust wireless communication in the 2.4 - 2.4835 GHz unlicensed ISM band. It is intended for systems compliant with world-wide regulations covered by EN 300 440 (Europe), CFR47 Part 15 (US) and ARIB STD-T66 (Japan).

Targeting a wide range of applications at 2.4 GHz, the CC2400 supports over-the-air data rates of 10 kbps, 250 kbps and 1 Mbps without requiring any modifications to the hardware.

The CC2400 provides extensive hardware support for packet handling, data buffering, burst transmissions, data coding and error detection reducing the workload on the host microcontroller.

The main operating parameters of CC2400 can be programmed via an SPI-bus. In a typical system CC2400 will be used together with a microcontroller and a few external, passive components.

CC2400 is based on Chipcon’s SmartRF®-03 technology in 0.18 µm CMOS.
filter 查找其他 其他无线产品
下载

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 3
类型 标题 下载最新的英语版本 日期
* 辐射与可靠性报告 CC2400 Reliability Report 2006年 4月 28日
* 数据表 2.4 GHz Low-Power RF Transceiver 数据表 (Rev. A) 2006年 3月 21日
* 勘误表 CC2400 Errata Notes 2006年 1月 31日

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点