BQ75614-Q1 SafeTITM Precision Monitor With Integrated Current Sensing & Hardware Protector for 48V Battery Pack | 德州仪器 TI.com.cn

BQ75614-Q1
此产品为原型/实验产品,且尚未上市。测试和最终流程可能不完整。该产品可能会进一步变更或停产。
SafeTITM Precision Monitor With Integrated Current Sensing & Hardware Protector for 48V Battery Pack

 

More information

Full data sheet and other design resources are available. Request now

An evaluation module (EVM) is available. Request now

描述

The BQ75614-Q1 device provides high-accuracy cell voltage measurements up to 16S battery modules in less than 200 µs. The integrated front-end filters enable the system to implement with simple, low voltage raring, differential RC filters on the cell input channels. The integrated, post-ADC, low-pass filters enable filtered, DC-like, voltage measurements. Integrated current measurement with option to synchronize with cell voltage measurements for better state of charge (SOC) calculation. The device supports autonomous internal cell balancing with temperature monitoring to auto-pause and resume balancing to avoid an overtemperature condition. The device includes option to support fuse and relay open/close diagnostics. The device also includes eight GPIOs/auxiliary inputs that can be used for external thermistor measurements.

特性

  • Qualified for automotive applications
  • AEC-Q100 Qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • SafeTI™-26262 ASIL-D compliance
    • Cell voltage measurements
    • Current measurement
    • Temperature measurements
    • Communication
  • SafeTI™-26262 ASIL-B compliant
    • OV, UV Protector (hardware comparators)
    • OT, UT Protector (hardware comparators)
  • Pin-package and software compatible device family:
    • Stackable monitor 16S (BQ79616), 14S (BQ79614), and 12S (BQ79612)
    • Standalone monitor 48 V system (BQ75614)
  • Direct support on fuse and relay open and close diagnostics
  • Built-in redundancy path for voltage and temperature and current diagnostics
  • Highly accurate cell voltage measurements within 128 µs for all cell channels
  • Integrated post-ADC configurable digital low-pass filters
  • Supports bus bar connection and measurement
  • Built-in host-controlled hardware reset to emulate POR-like device reset
  • Supports internal cell balancing
    • Balancing current at 240 mA
    • Built-in balancing thermal management with automatic pause and resume control
  • 5 V LDO output to power external digital isolator
  • UART Host interface
  • Built-in SPI master

All trademarks are the property of their respective owners.

参数

与其它产品相比 电池监视器和平衡器 邮件 下载到电子表格中
Part number 立即下单 Number of series cells (Min) Number of series cells (Max) Features Operating temperature range (C) Rating Package Group Package size: mm2:W x L (PKG)
BQ75614-Q1 立即下单 6     16     Cell Balancing
Integrated ADC
Multi-cell Support
Open wire detection
Over-temperature (OT)
Over-voltage (OV)
Requires separate MCU
Stackable (built-in interface)
Temperature sense
Under-temperature (UT)
Under-voltage (UV)    
-40 to 125     Automotive     HTQFP | 64     64HTQFP: 144 mm2: 12 x 12 (HTQFP | 64)    
BQ79616-Q1 无样片 6     16     Cell Balancing
Integrated ADC
Multi-cell Support
Open wire detection
Over-temperature (OT)
Over-voltage (OV)
Requires separate MCU
Stackable (built-in interface)
Temperature sense
Under-temperature (UT)
Under-voltage (UV)    
-40 to 125     Automotive     HTQFP | 64     64HTQFP: 144 mm2: 12 x 12 (HTQFP | 64)