Advanced Driver Assistance Systems (ADAS) 参考设计

描述

TI Design TIDEP-0092 provides a foundation for short-range radar (SRR) applications using the AWR1642 evaluation module (EVM). This design allows the estimation of the position (in the azimuthal plane) and velocity of objects in its field of view up to 80 m.

主要特色

• Single-chip radar for SRR applications
• Detect objects (such as cars and motorcycles) up to 80 m away with range resolution of 35 cm
• Antenna field of view ±60° with angular resolution of approximately 15°
• Source code for fast Fourier transform (FFT) processing and detection provided by mmWave software (...)

购买选项

• 立即订购

可用资源

• Schematic/Block Diagram
• 最新Schematic/Block Diagram
• Short Range Radar Reference Design Using AWR1642 Schematic and Block Diagram 08 May 2017
• 更多Schematic/Block Diagram
• AR1642BOOST Hardware Files 13 Mar 2017
• IR14xx BoosterPack and DevPack ECOs 10 Mar 2017
• Bill of Materials
• 参考指南
• 技术参考资料
• User's Guide
• 层图（或 PCB 布局）
• 组装图
• CAD 文件
• 光绘文件

• TI 器件

• AWR1642
• LM4040
• LP87524B-Q1
• TCAN1042HGV-Q1
• TM4C1294NCPDT
• More

描述

The TIDA-00455 camera hub reference design allows up to four 1.3 Megapixel cameras to be connected to a TDA2x SoC Evaluation Module (EVM). Each camera connects to the hub through a single coax cable.  There are two OmniVision OV490 ISPs on the board that process the video and export it in (...)

主要特色

• Accepts four camera inputs over FPD-Link III
• Utilizes two OmniVision OV490 ISP's to create DVP output to TDA2x
• Provides wide range supply voltage for power over coax (4-14V)
• Connects directly to the parallel video ports on a TDA2x EVM
• Optimized to work with OminiVision OV10640 imagers

可用资源

• Schematic/Block Diagram
• Bill of Materials
• 参考指南
• 层图（或 PCB 布局）
• 组装图
• CAD 文件
• 光绘文件

• TI 器件

• DS90UB964-Q1
• MSP430F2272-Q1
• SN74LVC1G125-Q1
• TLVH431A-Q1
• TPS1H100-Q1
• More

描述

This solution was designed to make an integrated, size-optimized power design for ADAS applications using the TDA3x SoC off of an automotive battery input.  By targeting only applications with lower processing needs, we’re able to choose devices and components which are smaller, compared (...)

主要特色

• Complete TDA3x, DDRx, and CAN power solution
• Highly-integrated, size-optimized design
• Off-Battery operation
• Full power up/down sequencing
• Designed to meet ISO 7637-2:2004

可用资源

• Schematic/Block Diagram
• Bill of Materials
• 参考指南
• 技术参考资料
• CAD 文件
• 光绘文件

• TI 器件

• LM3880-Q1
• LM53603-Q1
• LM74610-Q1
• LP8731-Q1
• SN74AHC1G08-Q1
• More

描述

The automotive 1MP camera module reference design uses a CMOS imager to provide multiple uncompressed video formats over FPD-Link III. Supported video formats are 8- and 10-bit YUV422. TIs FPD-Link III SerDes technology enables the transmission of video data, bidirectional control signals and power (...)

主要特色

• Module outputs YUV422 720p up to 30fps
• Power supply using wide input voltage switching converter to withstand short to battery condition
• Single Rosenberger Fakra coax connector for digital video, power, control and diagnostics
• Space optimized design fits on a single PCB 20 x 20mm

可用资源

• Schematic/Block Diagram
• Bill of Materials
• 参考指南
• 层图（或 PCB 布局）
• 组装图
• CAD 文件
• 光绘文件

• TI 器件

• DS90UB913A-Q1
• LM53600-Q1
• LP5907-Q1
• TPS62261-Q1

描述

The TIDA-01004 reference design is a remote automotive camera module that connects over a high speed serial video interface to a display or machine vision processing system. It uses TIs FPD-Link III SerDes technology to transmit uncompressed MegaPixel video data, bidirectional control signals and (...)

主要特色

• Space optimized design fits on a single PCB 20x20 mm
• 1M pixel image sensor AR0140AT from Aptina providing 10/12 bit raw image data
• Single Rosenberger Fakra coax connector for digital video, power, control and diagnostics
• Power supply optimized for small size and high efficiency
• Diagnostic and built in (...)

可用资源

• Schematic/Block Diagram
• Bill of Materials
• 参考指南
• 层图（或 PCB 布局）
• 组装图
• CAD 文件
• 光绘文件

• TI 器件

• DS90UB933-Q1
• TPS3808-Q1
• TPS62170-Q1
• TPS62231-Q1

描述

此摄像头集中器参考设计最多允许将四个 130 万像素摄像头连接到 TDA3x 片上系统 (SoC) 评估模块 (EVM)。每个摄像头通过一条同轴电缆与集中器相连。通过 FPD-Link III 连接，这些摄像头连接到一个四端口的解串器。解串器的输出为 MIPI CSI-2。此设计还允许为传感器融合用例连接其他类型的传感器。

主要特色

• 接受通过 FPD-Link III 提供的 4 个摄像头输入
• 直接连接至 TDA3x EVM 上的 CSI-2 视频端口
• 为同轴电缆供电提供宽供电电压范围 (4-14V)
• 电路板电源可以直接来自汽车电池
• 将与任何使用兼容型 FPD-Link III 串行器的摄像头配合使用

可用资源

• Schematic/Block Diagram
• Bill of Materials
• 参考指南
• 层图（或 PCB 布局）
• 组装图
• CAD 文件
• 光绘文件

• TI 器件

• DS90UB964-Q1
• LM74610-Q1
• MSP430F2272-Q1
• SN74LVC1G125-Q1
• TLVH431A-Q1
• More

描述

The TIDA-01002 reference design provides uncompressed, 1 megapixel, HDR, YUV422 video for use in ADAS and infotainment systems. It uses TIs FPD-Link III SerDes technology and the ON Semiconductor® AS0140AT CMOS Imager to transmit video data, bidirectional control signals and power all over a (...)

主要特色

• Module outputs YUV422 720p up to 30fps
• Space optimized design fits on a single PCB 20x20mm
• Single Rosenberger Fakra coax connector for digital video, power, control and diagnostics

可用资源

• Schematic/Block Diagram
• Bill of Materials
• 参考指南
• 层图（或 PCB 布局）
• 组装图
• CAD 文件
• 光绘文件

• TI 器件

• DS90UB913A-Q1
• TPS62170-Q1
• TPS62171-Q1

描述

This solution was designed to be a broadly applicable automotive off-battery front end power supply for 10-15W systems. There is a focus on EMI/EMC testing and compliance as well to help designers satisfy the regulatory requirements associated with producing an automotive electronic subsystem.

主要特色

• Wide-Vin front end power supply for 10-15W systems
• Off-Battery operation with reverse battery protection
• Designed and tested for severe cold-crank operation
• Designed and tested to ISO 7637-2:2004 Pulse 1, 2a, 3a/b and 5b (clamped load dump)
• Tested for CISPR25 Conducted and Radiated Emissions

可用资源

• Schematic/Block Diagram
• Bill of Materials
• 参考指南
• CAD 文件
• 光绘文件

• TI 器件

• LM25122-Q1
• LM53603-Q1
• LM74610-Q1
• TPS3808-Q1

描述

This camera design demonstrates a very small solution size for 1.3 Megapixel automotive cameras. Only a single coax connection is required to provide digital video, power, camera control and diagnostics. Output video format is 10-bit up to 100MHz or 12-bit up to 75MHz.

主要特色

• Size optimized design fits on a single PCB 20x20 mm
• Power supply optimized for small size and low noise
• Diagnostic and Built In Self Test (BIST)
• Single Rosenberger Fakra coax connector for digital video, power, control and diagnostics
• 1.3 Mpixel HDR image sensor OV10640 from OmniVision providing 12bit (...)

可用资源

• Schematic/Block Diagram
• Bill of Materials
• 参考指南
• 技术参考资料
• CAD 文件
• 光绘文件

• TI 器件

• DS90UB913A-Q1
• TLV702-Q1
• TPS62170-Q1

描述

The TIDA-00262 Reference Design is a high speed serial video interface to connect a remote automotive camera module to a display or machine vision processing system. It uses TIs FPD-Link III SerDes technology to transmit uncompressed MegaPixel video data, bidirectional control signals and power (...)

主要特色

• Space optimized design fits on a single PCB 20x20 mm
• Power supply optimized for small size and high efficiency
• 1Mpixel image sensor AR0140AT from Aptina providing 10/12bit raw image data
• Single Rosenberger Fakra coax connector for digital video, power, control and diagnostics
• Diagnostic and Built In (...)

可用资源

• Schematic/Block Diagram
• 最新Schematic/Block Diagram
• TIDA-00262 Block Diagram 31 Jul 2014
• 更多Schematic/Block Diagram
• TIDA-00262 Schematic 31 Jul 2014
• Bill of Materials
• Software
• 参考指南
• 技术参考资料
• 最新技术参考资料
• TIDA-00262 Design Considerations 31 Jul 2014
• 更多技术参考资料
• TIDA-00262 Quick Start Guide 31 Jul 2014
• TIDA-00262 Test Images 31 Jul 2014
• 光绘文件

• TI 器件

• DS90UB913A-Q1
• TPS3836-Q1
• TPS62170-Q1
• TPS62231-Q1