ZHCSI09S June 2010 – August 2018 TPS65911
A general-purpose serial control interface (CTL-I2C) allows read and write access to the configuration registers of all resources of the system.
A second serial control interface (optional mode for EN1 and EN2 pins) can be dedicated to DVFS.
Both control interfaces are compliant with the HS-I2C specification.
These interfaces support the standard slave mode (100 Kbps), fast mode (400 Kbps), and high-speed mode (3.4 Mbps). The general-purpose I2C module using one slave hard-coded address (ID1 = 2Dh). The voltage scaling dedicated I2C module uses one slave hard-coded address (ID0 = 12h). The master mode is not supported.
The device supports seven-bit mode addressing.
It does not support the following features: