ZHCSFN9G August   2008  – December 2015 INA219

PRODUCTION DATA.  

  1. 特性
  2. 应用范围
  3. 说明
  4. 修订历史记录
  5. Related Products
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics:
    6. 7.6 Bus Timing Diagram Definitions
    7. 7.7 Typical Characteristics
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Basic ADC Functions
        1. 8.3.1.1 Power Measurement
        2. 8.3.1.2 PGA Function
        3. 8.3.1.3 Compatibility With TI Hot Swap Controllers
    4. 8.4 Device Functional Modes
      1. 8.4.1 Filtering and Input Considerations
    5. 8.5 Programming
      1. 8.5.1 Programming the Calibration Register
      2. 8.5.2 Programming the Power Measurement Engine
        1. 8.5.2.1 Calibration Register and Scaling
      3. 8.5.3 Simple Current Shunt Monitor Usage (No Programming Necessary)
      4. 8.5.4 Default Settings
      5. 8.5.5 Bus Overview
        1. 8.5.5.1 Serial Bus Address
        2. 8.5.5.2 Serial Interface
      6. 8.5.6 Writing to and Reading from the INA219
        1. 8.5.6.1 High-Speed I2C Mode
        2. 8.5.6.2 Power-Up Conditions
    6. 8.6 Register Maps
      1. 8.6.1 Register Information
      2. 8.6.2 Register Details
        1. 8.6.2.1 Configuration Register (address = 00h) [reset = 399Fh]
      3. 8.6.3 Data Output Registers
        1. 8.6.3.1 Shunt Voltage Register (address = 01h)
        2. 8.6.3.2 Bus Voltage Register (address = 02h)
        3. 8.6.3.3 Power Register (address = 03h) [reset = 00h]
        4. 8.6.3.4 Current Register (address = 04h) [reset = 00h]
      4. 8.6.4 Calibration Register
        1. 8.6.4.1 Calibration Register (address = 05h) [reset = 00h]
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Register Results for the Example Circuit
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12器件和文档支持
    1. 12.1 社区资源
    2. 12.2 商标
    3. 12.3 静电放电警告
    4. 12.4 Glossary
  13. 13机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Specifications

Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)
MIN MAX UNIT
VS Supply voltage 6 V
Analog Inputs
IN+, IN–
Differential (VIN+ – VIN–)(2) –26 26 V
Common-mode(VIN+ + VIN–) / 2 -0.3 26 V
SDA GND – 0.3 6 V
SCL GND – 0.3 VS + 0.3 V
Input current into any pin 5 mA
Open-drain digital output current 10 mA
Operating temperature –40 125 °C
TJ Junction temperature 150 °C
Tstg Storage temperature –65 150 °C
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
VIN+ and VIN– may have a differential voltage of –26 to 26 V; however, the voltage at these pins must not exceed the range –0.3 to 26 V.

ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1) ±4000 V
Charged device model (CDM), per JEDEC specification JESD22-C101, all pins(2) ±750
Machine Model (MM) ±200
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
MIN NOM MAX UNIT
VCM 12 V
V S 3.3 V
TA –25 85 ºC

Thermal Information

THERMAL METRIC(1) INA219 UNIT
D (SOIC) DCN (SOT)
8 PINS 8 PINS
RθJA Junction-to-ambient thermal resistance 111.3 135.4 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 55.9 68.1 °C/W
RθJB Junction-to-board thermal resistance 52 48.9 °C/W
ψJT Junction-to-top characterization parameter 10.7 9.9 °C/W
ψJB Junction-to-board characterization parameter 51.5 48.4 °C/W
RθJC(bot) Junction-to-case (bottom) thermal resistance N/A N/A °C/W
For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report, SPRA953.

Electrical Characteristics:

At TA = 25°C, VS = 3.3 V, VIN+ = 12V, VSHUNT = (VIN+ – VIN–) = 32 mV, PGA = /1, and BRNG(1) = 1, unless otherwise noted.
PARAMETER TEST CONDITIONS INA219A INA219B UNIT
MIN TYP MAX MIN TYP MAX
INPUT
VSHUNT Full-scale current sense (input) voltage range PGA = /1 0 ±40 0 ±40 mV
PGA = /2 0 ±80 0 ±80 mV
PGA = /4 0 ±160 0 ±160 mV
PGA = /8 0 ±320 0 ±320 mV
Bus voltage (input voltage) range(2) BRNG = 1 0 32 0 32 V
BRNG = 0 0 16 0 16 V
CMRR Common-mode rejection VIN+ = 0 to 26 V 100 120 100 120 dB
VOS Offset voltage, RTI(3) PGA = /1 ±10 ±100 ±10 ±50(4) μV
PGA = /2 ±20 ±125 ±20 ±75(4) μV
PGA = /4 ±30 ±150 ±30 ±75(4) μV
PGA = /8 ±40 ±200 ±40 ±100(4) μV
vs Temperature TA = –25°C to 85°C 0.1 0.1 μV/°C
PSRR vs Power Supply VS = 3 to 5.5 V 10 10 μV/V
Current sense gain error ±40 ±40 m%
vs Temperature TA = –25°C to 85°C 1 1 m%/°C
IN+ pin input bias current Active mode 20 20 μA
IN– pin input bias current || VIN– pin input impedance Active mode 20 || 320 20 || 320 μA || kΩ
IN+ pin input leakage(5) Power-down mode 0.1 ±0.5 0.1 ±0.5 μA
IN– pin input leakage(5) Power-down mode 0.1 ±0.5 0.1 ±0.5 μA
DC ACCURACY
ADC basic resolution 12 12 bits
Shunt voltage, 1 LSB step size 10 10 μV
Bus voltage, 1 LSB step size 4 4 mV
Current measurement error ±0.2% ±0.5% ±0.2% ±0.3%(4)
over Temperature TA = –25°C to 85°C ±1% ±0.5%(4)
Bus voltage measurement error ±0.2% ±0.5% ±0.2% ±0.5%
over Temperature TA = –25°C to 85°C ±1% ±1%
Differential nonlinearity ±0.1 ±0.1 LSB
ADC TIMING
ADC conversion time 12 bit 532 586 532 586 μs
11 bit 276 304 276 304 μs
10 bit 148 163 148 163 μs
9 bit 84 93 84 93 μs
Minimum convert input low time 4 4 μs
SMBus
SMBus timeout(6) 28 35 28 35 ms
DIGITAL INPUTS (SDA as Input, SCL, A0, A1)
Input capacitance 3 3 pF
Leakage input current 0 ≤ VIN ≤ VS 0.1 1 0.1 1 μA
VIH input logic level 0.7 (VS) 6 0.7 (VS) 6 V
VIL input logic level –0.3 0.3 (VS) –0.3 0.3 (VS) V
Hysteresis 500 500 mV
OPEN-DRAIN DIGITAL OUTPUTS (SDA)
Logic 0 output level ISINK = 3 mA 0.15 0.4 0.15 0.4 V
High-level output leakage current VOUT = VS 0.1 1 0.1 1 μA
POWER SUPPLY
Operating supply range 3 5.5 3 5.5 V
Quiescent current 0.7 1 0.7 1 mA
Quiescent current, power-down mode 6 15 6 15 μA
Power-on reset threshold 2 2 V
BRNG is bit 13 of the Configuration register 00h in Figure 19.
This parameter only expresses the full-scale range of the ADC scaling. In no event should more than 26 V be applied to this device.
Referred-to-input (RTI)
Indicates improved specifications of the INA219B.
Input leakage is positive (current flowing into the pin) for the conditions shown at the top of the table. Negative leakage currents can occur under different input conditions.
SMBus timeout in the INA219 resets the interface any time SCL or SDA is low for over 28 ms.

Bus Timing Diagram Definitions(1)

FAST MODE HIGH-SPEED MODE UNIT
MIN MAX MIN MAX
ƒ(SCL) SCL operating frequency 0.001 0.4 0.001 2.56 MHz
t(BUF) Bus free time between STOP and START condition 1300 160 ns
t(HDSTA) Hold time after repeated START condition.
After this period, the first clock is generated.
600 160 ns
t(SUSTA) Repeated START condition setup time 600 160 ns
t(SUSTO) STOP condition setup time 600 160 ns
t(HDDAT) Data hold time 0 900 0 90 ns
t(SUDAT) Data setup time 100 10 ns
t(LOW) SCL clock LOW period 1300 250 ns
t(HIGH) SCL clock HIGH period 600 60 ns
tF DA Data fall time 300 150 ns
tFCL Clock fall time 300 40 ns
tRCL Clock rise time 300 40 ns
tRCL Clock rise time for SCLK ≤ 100kHz 1000 ns
Values based on a statistical analysis of a one-time sample of devices. Minimum and maximum values are not ensured and not production tested.
INA219 ai_tim_bus_bos448.gif Figure 1. Bus Timing Diagram

Typical Characteristics

At TA = 25°C, VS = 3.3 V, VIN+ = 12 V, VSHUNT = (VIN+ – VIN–) = 32 mV, PGA = /1, and BRNG = 1, unless otherwise noted.
INA219 tc_frq_resp_bos448.gif
Figure 2. Frequency Response
INA219 tc_shunt_g-tmp_bos448.gif
Figure 4. ADC Shunt Gain Error vs Temperature
INA219 tc_bus_g-tmp_bos448.gif
Figure 6. ADC Bus Gain Error vs Temperature
INA219 tc_in_curr_v_bos448.gif
Figure 8. Input Currents With Large Differential Voltages(VIN+ at 12 V, Sweep Of VIN–)
INA219 tc_shutdwn-tmp_bos448.gif
Figure 10. Shutdown IQ vs Temperature
INA219 tc_shutdwn-frq_bos448.gif
Figure 12. Shutdown IQ vs I2C Clock Frequency
INA219 tc_shunt_off-tmp_bos448.gif
Figure 3. ADC Shunt Offset vs Temperature
INA219 tc_bus_off-tmp_bos448.gif
Figure 5. ADC Bus Voltage Offset vs Temperature
INA219 tc_inl-vin_bos448.gif
Figure 7. Integral Nonlinearity vs Input Voltage
INA219 tc_iq-tmp_bos448.gif
Figure 9. Active IQ vs Temperature
INA219 tc_iq-i2c_bos448.gif
Figure 11. Active IQ vs I2C Clock Frequency