ZHCSIG4A July   2018  – June 2019 DLPC3434

PRODUCTION DATA.  

  1. 特性
  2. 应用
  3. 说明
    1.     Device Images
      1.      简化应用
  4. 修订历史记录
  5. Pin Configuration and Functions
    1.     Pin Functions – Board Level Test, Debug, and Initialization
    2.     Pin Functions – Parallel Port Input Data and Control
    3.     Pin Functions – DMD Reset and Bias Control
    4.     Pin Functions – DMD Sub-LVDS Interface
    5.     Pin Functions – Peripheral Interface
    6.     Pin Functions – GPIO Peripheral Interface
    7.     Pin Functions – Clock and PLL Support
    8.     Pin Functions – Power and Ground
  6. Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics over Recommended Operating Conditions
    6. 6.6  Electrical Characteristics
    7. 6.7  Internal Pullup and Pulldown Characteristics
    8. 6.8  High-Speed Sub-LVDS Electrical Characteristics
    9. 6.9  Low-Speed SDR Electrical Characteristics
    10. 6.10 System Oscillators Timing Requirements
    11. 6.11 Power-Up and Reset Timing Requirements
    12. 6.12 Parallel Interface Frame Timing Requirements
    13. 6.13 Parallel Interface General Timing Requirements
    14. 6.14 Flash Interface Timing Requirements
  7. Parameter Measurement Information
    1. 7.1 HOST_IRQ Usage Model
    2. 7.2 Input Frame Rates and 3-D Display Operation
      1. 7.2.1 Parallel Interface Data Transfer Format
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Interface Timing Requirements
        1. 8.3.1.1 Parallel Interface
      2. 8.3.2  Serial Flash Interface
      3. 8.3.3  Tested Flash Devices
      4. 8.3.4  Serial Flash Programming
      5. 8.3.5  SPI Signal Routing
      6. 8.3.6  I2C Interface Performance
      7. 8.3.7  Content-Adaptive Illumination Control
      8. 8.3.8  Local Area Brightness Boost
      9. 8.3.9  3-D Glasses Operation
      10. 8.3.10 DMD (Sub-LVDS) Interface
      11. 8.3.11 Calibration and Debug Support
      12. 8.3.12 DMD Interface Considerations
    4. 8.4 Device Functional Modes
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
    1. 10.1 System Power-Up and Power-Down Sequence
    2. 10.2 DLPC3434 Power-Up Initialization Sequence
    3. 10.3 DMD Fast PARK Control (PARKZ)
    4. 10.4 Hot Plug Usage
    5. 10.5 Maximum Signal Transition Time
  11. 11Layout
    1. 11.1 Layout Guidelines
      1. 11.1.1  PCB Layout Guidelines for Internal ASIC PLL Power
      2. 11.1.2  DLPC3434 Reference Clock
        1. 11.1.2.1 Recommended Crystal Oscillator Configuration
      3. 11.1.3  General PCB Recommendations
      4. 11.1.4  General Handling Guidelines for Unused CMOS-Type Pins
      5. 11.1.5  Maximum Pin-to-Pin, PCB Interconnects Etch Lengths
      6. 11.1.6  Number of Layer Changes
      7. 11.1.7  Stubs
      8. 11.1.8  Terminations
      9. 11.1.9  Routing Vias
      10. 11.1.10 Thermal Considerations
    2. 11.2 Layout Example
  12. 12器件和文档支持
    1. 12.1 器件支持
      1. 12.1.1 第三方产品免责声明
      2. 12.1.2 器件命名规则
        1. 12.1.2.1 器件标记
      3. 12.1.3 视频时序参数定义
    2. 12.2 相关链接
    3. 12.3 社区资源
    4. 12.4 商标
    5. 12.5 静电放电警告
    6. 12.6 Glossary
  13. 13机械、封装和可订购信息
    1. 13.1 Package Option Addendum
      1. 13.1.1 Packaging Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

System Power-Up and Power-Down Sequence

Although the DLPC3434 requires an array of power supply voltages, (for example, VDD, VDDLP12, VDD_PLLM/D, VCC18, VCC_FLSH, VCC_INTF), since VDDLP12 is tied to the 1.1-V VDD supply, then there are no restrictions regarding the relative order of power supply sequencing to avoid damaging the DLPC3434 (This is true for both power-up and power-down scenarios). Similarly, there is no minimum time between powering-up or powering-down the different supplies if VDDLP12 is tied to the 1.1-V VDD supply.

Although there is no risk of damaging the DLPC3434 if the above power sequencing rules are followed, the following additional power sequencing recommendations must be considered to ensure proper system operation.

  • To ensure that DLPC3434 output signal states behave as expected, all DLPC3434 I/O supplies should remain applied while VDD core power is applied. If VDD core power is removed while the I/O supply (VCC_INTF) is applied, then the output signal state associated with the inactive I/O supply will go to a high impedance state.
  • Additional power sequencing rules may exist for devices that share the supplies with the DLPC3434, and thus these devices may force additional system power sequencing requirements.

Note that when VDD core power is applied, but I/O power is not applied, additional leakage current may be drawn. This added leakage does not affect normal DLPC3434 operation or reliability.

Figure 20 and Figure 21 show the DLPC3434 power-up and power-down sequence for both the normal PARK and fast PARK operations of the DLPC3434 ASIC.

Figure 20. DLPC3434 Power-Up Timing
DLPC3434 power_down_dlps143.gifFigure 21. DLPC3434 Normal Power-Down
DLPC3434 DLPS084_Figures_b1_PowerDownFast.gifFigure 22. DLPC3434 Fast Power-Down